This has been an on going problem especially since my triple-bypass 7 years ago and P.A.D. long before that. Had been under control.
This afternoon I got a few pictures of the rifle together the way it was just shot and then got the barreled action separated and checked for new cracks or separations. None found!Ran out of light so tomorrow I will attempt to get pictures of both sides of the epoxy repair.
Also started sanding the stock for refinishing and sanded out the excess epoxy the oozed out of the crack. Also made some alteration to the stock on the side that the finger goes to the trigger. As it was it was slightly too large and was restricting reach. Also sanded down some of the palm swell as it too was a bit large for my hand. All seems to fit better and is more comfortable.
Bookmarks