Results 1 to 2 of 2

Thread: 40 grain lead vs 36 grain hp??

  1. #1
    Basic Member
    Join Date
    Oct 2016
    Posts
    64

    40 grain lead vs 36 grain hp??


    I recently had to sell my 10/22 but after the emergency was paid I had enough to get a Savage Mark 2 basic trigger model at Walmart for $88 on clearance. I may upgrade the trigger in the future but with squirrel season in now through February, I thought I would set the scope. I have on it a Simmons 22 mag 3-9x32 and it set real fast and seems to be clear enough to take tree chickens. My question is how many have shot different grains and they hit right with each other? I have 40 grain Federal auto match lead and hit dead center at 30 yds in a 1 inch circle with a 3 shot group that looks like one big hole in a larger caliber. I decided to try Federal 36 grain cphp and Winchest 36 grain cphp to see the hit difference. They hit center but about 1/2 inch high but still in circle with groups again tearing into one another. Is this the norm for most ammo close to the same grain? I have always used Federal but those Winchesters were clearanced at Walmart to good to pass up. I also set at 30 yds because all I use my 22lr for is plinking and squirrel hunt in close in the woods. Thanks

  2. #2
    Basic Member
    Join Date
    May 2018
    Location
    Canada
    Posts
    226
    See answer on RFC - Same Q - this evening.

Similar Threads

  1. Zeroing a Couple of .223 Hunting Loads; 62 Grain Vs. 55 Grain
    By Turkeytider in forum Ammunition & Reloading
    Replies: 7
    Last Post: 10-10-2021, 10:00 AM
  2. 168 grain for 308
    By Theheavychevy85 in forum Ammunition & Reloading
    Replies: 21
    Last Post: 03-30-2018, 11:04 AM
  3. Best grain for .223 REM
    By Russ77 in forum Ammunition & Reloading
    Replies: 15
    Last Post: 08-09-2015, 11:10 AM
  4. Looking for accurate reload datta for 338-06 in 180 grain & 250 grain
    By blackbart338-06 in forum Ammunition & Reloading
    Replies: 2
    Last Post: 07-05-2013, 10:49 PM
  5. WANTED LOADS FOR 180 GRAIN AND 170 GRAIN PROJECTILES FOR 308
    By barry t in forum Ammunition & Reloading
    Replies: 2
    Last Post: 04-23-2010, 09:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •