Yup, Dead weight works.
Either for trigger pull measurement or pull gauge calibration :)
Yup, Dead weight works.
Either for trigger pull measurement or pull gauge calibration :)
using the Target trigger as a test jig.
Trying a replacement Accutrigger Safety Blade Spring.
Chinese 0.3 X 5 X 15mm.
Bent one loop up to fit into hole in trigger.
My Trigger Gauge has a lower limit of 1.8oz.
The blade will not register on the gauge.
Will swap spring into Flo's Savage to see what total force is.
Attachment 10665
Bookmarks