She's shot once from a bench, once prone.
Both times the 31.8 load did the best. (31.5 to 32.0)
Might take a few times to really get her on the rifle.
A light tacky spray glue and hobby foam might work with little chance of damaging the stock.
I can always clean it up and add some poly to the stock area.
Going back, maybe next week with some dither in the jump.
Make some more once fired from new and make some twice fired.
Tossed together another bolt.
The right one is a new style pin with the Thrust Bearing and shim in 22Nosler (shot groups in picture),
Middle one is the old style pin with Ceramic bearing (7/32) /38 Spec and shim in 22 Nosler, will try next week.
and
The left one is an old style in 6.8/22 Nosgar with the Thrust Bearing and shim. It did OK.
Reply With Quote
Bookmarks