Results 1 to 8 of 8

Thread: Shell Holders??

  1. #1
    Basic Member Ernest T's Avatar
    Join Date
    Jul 2022
    Posts
    476

    Shell Holders??


    Do you have to use the same brand shell holder as your die? It doesn't seem like it'd make a difference.

  2. #2
    Team Savage Stumpkiller's Avatar
    Join Date
    Jan 2018
    Location
    Port Crane, NY
    Age
    65
    Posts
    990
    Makes no difference. Just note that the part numbers for given case heads are different between brands.

    I.e.: #16 from RCBS is 9mm Luger but #16 for Lee is 7.62mm X 54mmR and Redding #16 is 11mm X 60mmR Mauser. Not even close.

    Note also that non-press shell holders, like the Lee auto-prime, don’t fit reloading presses.

    Final note: I don’t know about turret presses or Dillon equipment, but RCBS, Lee, Lyman, Redding, Hornady, Pacific interchange for single-stage press dies and shell holders.
    "They couldn't hit an elephant at this distance." Last words of Gen. Sedgwik

  3. #3
    Basic Member
    Join Date
    Jun 2018
    Location
    las cruces, nm
    Age
    71
    Posts
    3,010
    Since I reload in a progressive, then, usually no. I do use a lot of Lee dies, but, not the shellholder that comes with them.

  4. #4
    Super Moderator Blue Avenger's Avatar
    Join Date
    Dec 2006
    Location
    Minnesota
    Age
    66
    Posts
    3,014
    Very slight machining tolerances , so one may slide into your press easier then another. Or if your die is set to cam over, another holder may be loose or tighter. But mostly universal now. As said above each company has there own number chart
    .223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor

  5. #5
    Basic Member Ernest T's Avatar
    Join Date
    Jul 2022
    Posts
    476
    Thanks for the verification.

  6. #6
    Basic Member
    Join Date
    Feb 2023
    Posts
    14
    Quote Originally Posted by Stumpkiller View Post
    Makes no difference. Just note that the part numbers for given case heads are different between brands.

    I.e.: #16 from RCBS is 9mm Luger but #16 for Lee is 7.62mm X 54mmR and Redding #16 is 11mm X 60mmR Mauser. Not even close.

    Note also that non-press shell holders, like the Lee auto-prime, don’t fit reloading presses.

    Final note: I don’t know about turret presses or Dillon equipment, but RCBS, Lee, Lyman, Redding, Hornady, Pacific interchange for single-stage press dies and shell holders.
    Good info.

  7. #7
    Team Savage

    Join Date
    Jan 2017
    Location
    Easten WA near ID border
    Age
    67
    Posts
    1,190
    I have different brands but always use the same one for a given caliber and it goes in the box with the dies.

  8. #8
    Basic Member South Prairie jim's Avatar
    Join Date
    Jul 2018
    Location
    Montana
    Posts
    314
    Im not an expert but ‘Standard shell holders should have a .125 deck height, in basic overview a standard ( perfect world) resizing die will be .125 short of the sammi chamber specs from case head to shoulder datum. Hopefully lol

Similar Threads

  1. DOJ trying to hamstring FFL License Holders
    By J.Baker in forum Off-Topic
    Replies: 0
    Last Post: 01-07-2022, 02:40 PM
  2. Magazine Holders
    By mikein in forum Picture Post
    Replies: 0
    Last Post: 07-29-2014, 03:16 PM
  3. Shell Holders Need Ideas
    By KTP in forum 110-Series Rifles
    Replies: 2
    Last Post: 10-09-2013, 08:33 AM
  4. Shell Holders
    By Dennis in forum Ammunition & Reloading
    Replies: 2
    Last Post: 06-19-2012, 12:28 PM
  5. shell holders
    By birdie in forum Ammunition & Reloading
    Replies: 4
    Last Post: 02-26-2012, 02:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •