New Firing Pin this time.

[Robinhood]

Is there something missing?

[Dave Hoback]

Is there something missing?

??

[Robinhood]

I was thinking you had pictures.

[Dave Hoback]

You don’t see the pictures I posted?

[PhilC]

I see the pics...

[Robinhood]

I can see them in FF but not with Brave. The only thing..and it is a picture with no dimensions, It looks long. Personally if I was going to the trouble of making a new firing pin, I think i would make it a hybrid between the new and the old style. Where the protrusion is set and there were no threads on the head end. You would have to start with larger drill rod though. You could experiment with pin diameter(under the spring) also. Then make the cocking piece to fit the size thread you needed to be ie...12-28 maybe or whatever. That being done now you dont have the spring dragging on the inside of the bolt.

Once you are done there you could start making bolts for rem 700's utilizing savage bolt heads where the Remage barrels would not need to be machined for the 3 rings of steel. Hoback Innovations!!! Do it!!!


Sorry. I got a little carried away.

[Dave Hoback]

Lol! Yeah.... nothing really “innovating” here. Just happen to know a. Good bit about metals and be OK at making things from it.

I had though about making a new style pin. I want to. Unfortunately, I don’t have one to measure & use as reference.....or any of the associated parts for one. But, hopefully one day I will. We’ve discussed in the past, & I know you are more fond of the new style. I will say, the new style has been growing on me, looking at it online. But I simply did this for now because I enjoy doing this stuff.

Oh, and yes...it is slightly longer. Only. A bit..the picture is deceiving as the new pin is in front. It’s only longer at the tip. And there is actually less thread/flat portion, which keeps more mass of material. I measured everything & sized it like this by purpose. Better to have a heavier striker pin. Just as a thinner diameter in the front deliver more force to the primer, so does more weight behind the same size tip. Lock time is over hyped(which I know you know). It’s not an auto! I couldn’t care less about lock time. Still need to to turn down the very front portion to fit the outlet of my PTG bolt head; once I heat treat. (I had to order some more 309 SS foil wrap. Prevents decarb) The PTG I have fits a #50 (.070”) drill bit perfectly! My stock firing pin is .068” & slightly loose.