Results 1 to 11 of 11

Thread: New 110 SA non accustock compatibility question(s)...

  1. #1
    Basic Member Papa_D's Avatar
    Join Date
    Jun 2020
    Age
    46
    Posts
    32

    New 110 SA non accustock compatibility question(s)...


    So I reached out to Savage CS the other day asking about the possibility of upgrading my XP Hunter to an Accustock. (Of course the factory does not sell these, however Magpul does). The representative informed me that if the rifle did not come with an Accustock from the factory, then it is not compatible with one. Can anyone attest to this as truth or is it fake news?

    Sent from my SM-A205U using Tapatalk

  2. #2
    Team Savage
    Join Date
    Nov 2015
    Location
    Texas
    Posts
    625
    Fake news IMO.

  3. #3
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,042
    It’s the recoil lug. The one for the Accustock is “smaller” than the standard recoil lug. You can swap it out.

  4. #4
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Bayou Country
    Age
    63
    Posts
    6,801
    Quote Originally Posted by olddav View Post
    It’s the recoil lug. The one for the Accustock is “smaller” than the standard recoil lug. You can swap it out.

    This right here^. The Accustock recoil lug is designed to fit between the aluminum chassis rail. It is very similar to this(with a stamped locating bump) ....

    Where yours looks like this...
    One Cannot Be PC And Be Intellectually Honest!

  5. #5
    Basic Member Papa_D's Avatar
    Join Date
    Jun 2020
    Age
    46
    Posts
    32
    Thanks for the information both olddav and RobinHood.

    Sent from my SM-A205U using Tapatalk

  6. #6
    Team Savage
    Join Date
    Nov 2015
    Location
    Texas
    Posts
    625
    Yea, don't listen to me. I forgot about the different recoil lug for the accustock rifles.

    That said, I have taken a dremel to an Accustock and made it work with my XP .308. It's not that hard to do.

  7. #7
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Bayou Country
    Age
    63
    Posts
    6,801
    Quote Originally Posted by Newtosavage View Post
    Yea, don't listen to me. I forgot about the different recoil lug for the accustock rifles.

    That said, I have taken a dremel to an Accustock and made it work with my XP .308. It's not that hard to do.

    Haha...I would have bet on you saying this. You are pretty crafty and it came as no surprise!!!!
    I have done it too but I ended up pulling it out and milling it somewhat correctly.
    One Cannot Be PC And Be Intellectually Honest!

  8. #8
    Team Savage
    Join Date
    Nov 2015
    Location
    Texas
    Posts
    625
    Quote Originally Posted by Robinhood View Post
    Haha...I would have bet on you saying this. You are pretty crafty and it came as no surprise!!!!
    I have done it too but I ended up pulling it out and milling it somewhat correctly.
    You know what Red Green always said - "if the women don't find you handsome, they should at least find you handy!" :D

  9. #9
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Bayou Country
    Age
    63
    Posts
    6,801
    A phrase I use regularly.
    One Cannot Be PC And Be Intellectually Honest!

  10. #10
    Basic Member Papa_D's Avatar
    Join Date
    Jun 2020
    Age
    46
    Posts
    32
    Quote Originally Posted by Newtosavage View Post
    You know what Red Green always said - "if the women don't find you handsome, they should at least find you handy!" :D
    I thought I was supposed to be hands-y. No wonder I've been slapped so often.

    Sent from my SM-A205U using Tapatalk

  11. #11
    Basic Member
    Join Date
    Apr 2017
    Location
    Northern MN
    Posts
    387
    Quote Originally Posted by Robinhood View Post
    Haha...I would have bet on you saying this. You are pretty crafty and it came as no surprise!!!!
    I have done it too but I ended up pulling it out and milling it somewhat correctly.
    I was in this position. I tried grinding it on the action... then i took it off the gun to do it right, and i saw how cheap Midway had them and just ended up putting one of theirs back on.

Similar Threads

  1. Accustock compatibility
    By blfuller in forum 110-Series Rifles
    Replies: 16
    Last Post: 02-17-2021, 01:29 PM
  2. Accustock magazine compatibility?
    By 6.5savageguy in forum 110-Series Rifles
    Replies: 2
    Last Post: 10-20-2016, 10:01 PM
  3. Staggerfeed vs Centerfeed Compatibility Question.
    By Tackdriver in forum 110-Series Rifles
    Replies: 2
    Last Post: 12-29-2013, 10:02 PM
  4. Barrel contours and Accustock compatibility
    By Sundo in forum 110-Series Rifles
    Replies: 2
    Last Post: 09-27-2011, 07:53 PM
  5. Bolt head question on compatibility
    By 223Rem in forum 110-Series Rifles
    Replies: 3
    Last Post: 04-13-2010, 06:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •