Results 1 to 4 of 4

Thread: Older two piece sear assemblies

  1. #1
    New Member
    Join Date
    Dec 2020
    Posts
    2

    Older two piece sear assemblies


    So I've got an older model 110 .30-06 with a two piece sear. The problem is that the lever portion of the sear that you depress to remove the bolt has come off the shorter of the two pins that it was attached to. After pressing it back on, it worked itself off again.

    Not really seeing a permanent fix other than peening or possibly tack welding it onto the pin.

    Any other ideas?

  2. #2
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,019
    I used a little JB Weld and a center punch. So far so good.

  3. #3
    New Member
    Join Date
    Dec 2020
    Posts
    2
    Well....I had planned on fixing it, but the guy who owns the rifle decided he wants the sear replaced instead of being repaired.

    So far it's like trying to find a unicorn.

  4. #4
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,019
    He may need to adjust his expectations a little bit, but as I am not involved my opinion means nothing.

Similar Threads

  1. Replies: 4
    Last Post: 12-08-2018, 03:48 PM
  2. Sear engagement issue, I think I may need a new sear
    By Dieseltech09 in forum 110-Series Rifles
    Replies: 5
    Last Post: 01-07-2014, 12:39 PM
  3. Replies: 4
    Last Post: 07-02-2012, 12:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •