Results 1 to 12 of 12

Thread: 110 trigger assembly

  1. #1
    New Member
    Join Date
    May 2020
    Posts
    9

    110 trigger assembly


    So I recently bought a couple stripped 110 receivers of Gunbroker for a price I couldnít say no to. Iíve already sourced complete bolts but am struggling to find triggers. Anyone have any knowledge on where I could source them?

  2. #2
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Bayou Country
    Age
    62
    Posts
    5,847
    A complete trigger including the hanger and all may be a stretch if you can't source all of the parts from Numrich. Good luck.
    One Cannot Be PC And Be Intellectually Honest!

  3. #3
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,086
    You need to know if they are accutrigger type or the old style. The quickest giveaway would be to look at the safety groove. If it's 1/4" wide, it's the old style.....if it's slightly wider with a dovetail, it's an accutrigger (current) style.
    "As long as there's lead in the air....there's still hope.."

  4. #4
    Team Savage
    Join Date
    Jan 2015
    Location
    Austin
    Posts
    1,580
    Maybe this helps.

    https://www.savageshooters.com/content.php?274-Factory-AccuTrigger-Part-Numbers


    You can also place an ad in the classifieds section for a complete trigger assy.

    If you find one, but it lacks the sear, you can have your gunsmith order a sear from Savage.

    There may also be an aftermarket trigger available that does not rely on a factory sear.

    If you're unsure what you have, call Savage Customer Service and supply the serial number. They will tell you what it was when it left the factory.
    The longer I stay in the home, the more likely I'll become homeless.

  5. #5
    Basic Member
    Join Date
    Jan 2016
    Age
    41
    Posts
    767
    If you luck out on find replacements(they are getting harder to find), Jard makes a 3 lever, self contained unit which replaces all stock components.

  6. #6
    New Member
    Join Date
    May 2020
    Posts
    9
    Quote Originally Posted by Dave Hoback View Post
    If you luck out on find replacements(they are getting harder to find), Jard makes a 3 lever, self contained unit which replaces all stock components.
    I saw that last night. Itís not bad looking and considering i have 53.01 in these two I may order one.


    Sent from my iPhone using Tapatalk

  7. #7
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,086
    You still need the safety parts.
    "As long as there's lead in the air....there's still hope.."

  8. #8
    New Member
    Join Date
    May 2020
    Posts
    9
    Quote Originally Posted by sharpshooter View Post
    You still need the safety parts.
    Safety and bolt release


    Sent from my iPhone using Tapatalk

  9. #9
    Basic Member
    Join Date
    Jan 2016
    Age
    41
    Posts
    767
    Quote Originally Posted by Nickelgl View Post
    Safety and bolt release


    Sent from my iPhone using Tapatalk
    Not the release. It’s part of the sear. The Jard is supplied with that.

  10. #10
    New Member
    Join Date
    May 2020
    Posts
    9
    Quote Originally Posted by Dave Hoback View Post
    Not the release. Itís part of the sear. The Jard is supplied with that.
    Got it.


    Sent from my iPhone using Tapatalk

  11. #11
    Basic Member
    Join Date
    Jan 2016
    Age
    41
    Posts
    767
    But I guess the safety is hard as anything else to locate. I don’t see any except for the older style. They even make those aftermarket! But the one with the teardrop button....the one EVERYONE has. Yeah, no good on that!

  12. #12
    New Member
    Join Date
    May 2020
    Posts
    9
    So far I have found one accutrigger assembly and I should have it here today


    Sent from my iPhone using Tapatalk

Similar Threads

  1. MDL 116 trigger assembly?
    By justinp61 in forum Savage 110-Series Rifles
    Replies: 7
    Last Post: 11-13-2018, 06:03 PM
  2. B-Mag Series: B Mag trigger disassembly/ assembly
    By aridecommando in forum Savage & Stevens Rimfire Rifles
    Replies: 1
    Last Post: 05-03-2017, 08:51 AM
  3. suggestions for trigger assembly? 110 LA
    By waumpuscat in forum Savage 110-Series Rifles
    Replies: 2
    Last Post: 04-06-2017, 11:16 PM
  4. Trigger Re-assembly
    By jsthntn247 in forum Savage 110-Series Rifles
    Replies: 2
    Last Post: 07-24-2011, 10:15 PM
  5. MOVED: in bad need of mod 111 trigger assembly
    By 82boy in forum Savage 110-Series Rifles
    Replies: 0
    Last Post: 09-22-2010, 10:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •