Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 11 of 11

Thread: 3D Printed Single Shot Adaptor

  1. #1
    Basic Member
    Join Date
    Nov 2016
    Posts
    15

    Question 3D Printed Single Shot Adaptor

    Would any be interested in a single shot adaptor that you can 3D print? It connects to the bottom mag base.

  2. #2
    Team Savage
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    74
    Posts
    825
    Question, For which firearm Does this fit.

  3. #3
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    148
    Quote Originally Posted by Balljoint View Post
    Question, For which firearm Does this fit.
    An Axis?

  4. #4
    Basic Member
    Join Date
    Nov 2016
    Posts
    15
    Yes, the Savage Axis "short" action. I use it with my 6.5 creedmoor.

  5. #5
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    73
    Posts
    3,886
    Yes interested in this.
    Vietnam Vet, Jun 66 - Dec 67

  6. #6
    Basic Member
    Join Date
    Nov 2016
    Posts
    15
    Quote Originally Posted by GaCop View Post
    Yes interested in this.
    I was going to PM you but it looks like i need two more posts to do that.

  7. #7
    Basic Member
    Join Date
    Mar 2015
    Location
    Chico, CA
    Age
    70
    Posts
    25
    Sharp Shooter Supply makes a single shot loading ramp for the Axis. I have one on my .223 Axis and it works great. Rifle has to be disassembled to install but very easy to do.
    I shoot hundreds of rounds at ground squirrels from the bench and the loading ramp is a big help in not having to load the magazine every time.

  8. #8
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    45
    Posts
    6,016
    Quote Originally Posted by Magilla26 View Post
    Sharp Shooter Supply makes a single shot loading ramp for the Axis. I have one on my .223 Axis and it works great. Rifle has to be disassembled to install but very easy to do.
    I shoot hundreds of rounds at ground squirrels from the bench and the loading ramp is a big help in not having to load the magazine every time.
    You're thinking of the one for the 110-series. The one they make for the Axis (PolySled) snaps in just like a DBM on the Axis. It's molded from high density poly and uses a factory magazine bottom cap (included). Here's a pic, though they should be shipping with the new-style bottom cap with the updated magazine release setup now as I know that's what Savage sent them last time they put an order in for them.

    Click image for larger version. 

Name:	PolySled1.jpg 
Views:	44 
Size:	29.1 KB 
ID:	6448
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  9. #9
    Basic Member
    Join Date
    Nov 2016
    Posts
    15
    Quote Originally Posted by J.Baker View Post
    You're thinking of the one for the 110-series. The one they make for the Axis (PolySled) snaps in just like a DBM on the Axis. It's molded from high density poly and uses a factory magazine bottom cap (included). Here's a pic, though they should be shipping with the new-style bottom cap with the updated magazine release setup now as I know that's what Savage sent them last time they put an order in for them.

    Click image for larger version. 

Name:	PolySled1.jpg 
Views:	44 
Size:	29.1 KB 
ID:	6448
    I tried emailing them awhile back, got no response. Between that and most of the posts I've read about there lack of delivery I decided not to take that avenue. So I took some measurements of my gun and 3D printed something that works.

  10. #10
    Basic Member
    Join Date
    Mar 2015
    Location
    Chico, CA
    Age
    70
    Posts
    25
    My loading ramp is made of machined aluminum alloy. Not Poly. It fits in my Axis .223 and my rifle had to be disassembled to install it. It works great. The factory magazine is not used. I am not able to post a photo but it was made by SSS. Too bad you are getting no response.

  11. #11
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    73
    Posts
    3,886
    Quote Originally Posted by rdhoggattjr View Post
    I was going to PM you but it looks like i need two more posts to do that.
    Sent you a PM.
    Vietnam Vet, Jun 66 - Dec 67

Similar Threads

  1. B17/B22 Series: B22 Single shot adaptor
    By hoechst63 in forum Savage & Stevens Rimfire Rifles
    Replies: 2
    Last Post: 05-11-2019, 08:43 AM
  2. Replies: 2
    Last Post: 06-18-2018, 10:52 AM
  3. VLP Single Shot .223
    By Pastprime in forum Savage 110-Series Rifles
    Replies: 8
    Last Post: 12-27-2011, 01:20 PM
  4. VLP single shot
    By Appleseed in forum Savage 110-Series Rifles
    Replies: 9
    Last Post: 02-12-2011, 03:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •