Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Will a 110 6.5 CM Mag. feed 308's

  1. #1
    Team Savage
    Join Date
    May 2016
    Location
    NW Fla
    Age
    73
    Posts
    66

    Will a 110 6.5 CM Mag. feed 308's

    I've found a LH "Tactical" ?? in 6.5 CM, I have a 308 bbl. and am wondering if 308 rounds will feed through the 10 Rd. round Mag. that comes with the rifle ?

  2. #2
    New Member
    Join Date
    Apr 2019
    Age
    41
    Posts
    9
    Pretty sure it will the ones that come with the Bergara 6.5 made by Magpul say so on the side.

    Sent from my SM-N950U using Tapatalk

  3. #3
    New Member
    Join Date
    Feb 2018
    Posts
    14
    Short answer is yes. 308 ammunition will fit in it.

    The 308 cartridge was designed before 243, 6.5, 7mm-08 and so on. The only exception with magazines, is some people who handload ammunition need special magazines for longer internal length.

    There technically isn't such a thing as a 6.5 or 308 mag. They are called 308 mags out of convenience, and the fact that short action rifles all fit the same Over All Length (OAL) size cartridges within a bolt face family.

    I believe the bolt face diameter for the "308 family" of cartridges is .473 inches or .473. Its been some time since I've checked. That bolt face diameter goes back to the 1880's around the time of the 1st Argentine & Belgian Mauser.


    Sent from my iPhone using Tapatalk

  4. #4
    Team Savage
    Join Date
    May 2016
    Location
    NW Fla
    Age
    73
    Posts
    66
    Quote Originally Posted by isacpotatoes View Post
    Short answer is yes. 308 ammunition will fit in it.

    The 308 cartridge was designed before 243, 6.5, 7mm-08 and so on. The only exception with magazines, is some people who handload ammunition need special magazines for longer internal length.

    There technically isn't such a thing as a 6.5 or 308 mag. They are called 308 mags out of convenience, and the fact that short action rifles all fit the same Over All Length (OAL) size cartridges within a bolt face family.

    I believe the bolt face diameter for the "308 family" of cartridges is .473 inches or .473. Its been some time since I've checked. That bolt face diameter goes back to the 1880's around the time of the 1st Argentine & Belgian Mauser.


    Sent from my iPhone using Tapatalk

    OUT Fn STANDING !!

Similar Threads

  1. Savage long Action Stagard Feed to Center Feed stock conversion question...
    By travistodd1 in forum 110-Series Bolt-Action Rifles
    Replies: 11
    Last Post: 12-12-2016, 10:23 PM
  2. Need advice on a magnum rifle action (stagger feed vs. center feed)
    By TORCHRIDER in forum 110-Series Bolt-Action Rifles
    Replies: 6
    Last Post: 12-08-2015, 11:18 PM
  3. 2004 112 Long Action Stagered Feed & Manners T4A Centter Feed Stock
    By a.cassaro in forum 110-Series Bolt-Action Rifles
    Replies: 2
    Last Post: 01-25-2014, 12:13 PM
  4. Making a 110 long action stock for stagger feed fit center feed
    By teebirdhyzer in forum 110-Series Bolt-Action Rifles
    Replies: 4
    Last Post: 11-25-2010, 05:49 PM
  5. Staggered feed long action with center feed detachable magazine ...
    By dwm in forum 110-Series Bolt-Action Rifles
    Replies: 8
    Last Post: 02-13-2010, 10:49 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •