Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Mark II BTV - Accutrigger WITH vs Without the blade and spring.

  1. #1
    New Member
    Join Date
    Aug 2019
    Age
    48
    Posts
    1

    Mark II BTV - Accutrigger WITH vs Without the blade and spring.

    Hi guys. I just got this rifle over a week ago. I shot it at my range a few times, and I feel like the trigger weight could come down a bit.

    I've dis-assembled the trigger group, cleaned everything up inside, and saw that the actual trigger spring at the rear of the action, was already threaded as low as it can go.

    I'll likely use a 10-24 X 3/4 bolt to take up the space in the threads (in place of the narrow portion of the trigger spring that sits inside it), grind the threads off, and fit a weaker spring over the ground down top portion of the screw into a cylinder) to allow the spring to glide over it.

    But, do I actually NEED the accu-trigger blade to re-assemble the trigger group, and have it work as intended?

    Or does removing it not engage the sear properly?

    SEE: https://ibin.co/w800/4siyhjSjf99I.jpg

    Thanks

  2. #2
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    44
    Posts
    5,748
    Removing the blade will just make it a standard old trigger (no safety features) like the triggers found on most guns made before 2003.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

Similar Threads

  1. Mark I accu-trigger blade spring
    By Gary Jordan in forum Mark I, Mark II and 93R Rifles
    Replies: 1
    Last Post: 07-31-2019, 07:22 AM
  2. Sear Pin for Red Blade accutrigger: Can anyone help out? P/N 100223?
    By savageboy in forum 110-Series Bolt-Action Rifles
    Replies: 0
    Last Post: 05-29-2018, 09:54 AM
  3. anyone know where to find the blade spring on an accutrigger?
    By grouse in forum 110-Series Bolt-Action Rifles
    Replies: 3
    Last Post: 12-09-2017, 11:02 PM
  4. Can I get a red blade accutrigger from Savage for my rifles?
    By masterblaster in forum 110-Series Bolt-Action Rifles
    Replies: 8
    Last Post: 10-14-2013, 09:18 AM
  5. Blade on accutrigger
    By pdog2062 in forum 110-Series Bolt-Action Rifles
    Replies: 11
    Last Post: 02-18-2013, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •