Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 11 of 11

Thread: Old Style Cocking Piece Sleeve

  1. #1
    New Member
    Join Date
    Jan 2018
    Posts
    5

    Old Style Cocking Piece Sleeve

    Hi,

    I'm trying to convert my axis style firing pin to the adjustable older style. I can find the BAS and firing pin assembly but no Cocking Piece Sleeve. Does anybody have a lead on where to find them?

    Thanks,

  2. #2
    Basic Member
    Join Date
    Apr 2019
    Location
    missouri
    Age
    69
    Posts
    60
    Check Numrich Gun Parts

  3. #3
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    72
    Posts
    3,700
    Quote Originally Posted by varget204 View Post
    Check Numrich Gun Parts
    +1, you could give Savage customer service a call too to see if they will sell you one.
    Vietnam Vet, Jun 66 - Dec 67

  4. #4
    New Member
    Join Date
    Feb 2017
    Posts
    2
    Quote Originally Posted by iowan_savage View Post
    Hi,

    I'm trying to convert my axis style firing pin to the adjustable older style. I can find the BAS and firing pin assembly but no Cocking Piece Sleeve. Does anybody have a lead on where to find them?

    Thanks,
    Let us know how it turns out. Wanting to ditch the 3 piece firing pin on my axis, but I havent been able to find out what parts to get..

  5. #5
    Team Savage short round's Avatar
    Join Date
    Jun 2011
    Location
    Georgetown, ohio
    Age
    72
    Posts
    559
    Not sure that Axis can be changed to old style firing pin. the bolt length is shorter than long action & longer than short action.

  6. #6
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Texas
    Age
    62
    Posts
    4,922
    I am guessing that you are trying to change bolt heads and you can't get the firing pin protrusion?

    What we have previously seen is that the limiting factor with attempting to increase the pin protrusion would be the cocking piece pin hits the bottom of cocking ramp window. Am I close?
    One Cannot Be PC And Be Intellectually Honest!

  7. #7
    New Member
    Join Date
    Jan 2018
    Posts
    5
    Quote Originally Posted by Robinhood View Post
    I am guessing that you are trying to change bolt heads and you can't get the firing pin protrusion?

    What we have previously seen is that the limiting factor with attempting to increase the pin protrusion would be the cocking piece pin hits the bottom of cocking ramp window. Am I close?
    You're correct I want to be able to change bolt heads. I would also like to do the old ball bearing / .38 spl trick and be able to adjust the bolt so it isn't overcocked.
    Numrich does not have the part I need.

  8. #8
    New Member
    Join Date
    Jan 2018
    Posts
    5
    So I called savage and hey wanted the serial number for the parts I need. However, I need a different serial number for the parts I want. How do I go about getting these parts? This is for a short action.

    Thanks!

  9. #9
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Texas
    Age
    62
    Posts
    4,922
    K752434
    Product #: 1348930F ?
    Short and long action sleeves are interchangeable.
    Don't think the savage is over cocked, over sprung maybe.
    One Cannot Be PC And Be Intellectually Honest!

  10. #10
    New Member
    Join Date
    Jan 2018
    Posts
    5
    Thanks! FYI when I called again they said any bolt parts (except BAS) had to be shipped to an FFL.

  11. #11
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    Texas
    Age
    62
    Posts
    4,922
    Ask your FFL how much he will charge to receive your package. They are not restricted items that I know of. Only the receiver is serialized/traceable.
    One Cannot Be PC And Be Intellectually Honest!

Similar Threads

  1. Savage 10T-SR bolt lift kit install issue. New style cocking piece?
    By MattyZ28 in forum 110-Series Bolt-Action Rifles
    Replies: 1
    Last Post: 04-25-2018, 05:56 AM
  2. Cocking Piece Pin Help
    By shoalwater in forum 110-Series Bolt-Action Rifles
    Replies: 2
    Last Post: 03-31-2014, 07:14 PM
  3. Cocking piece pin
    By 03mossy in forum 110-Series Bolt-Action Rifles
    Replies: 13
    Last Post: 07-21-2013, 12:45 PM
  4. Do I need to trim the cocking sleeve for a bolt lift kit ??
    By tammons in forum 110-Series Bolt-Action Rifles
    Replies: 5
    Last Post: 02-02-2011, 05:47 PM
  5. cocking piece pin
    By flatshooter in forum 110-Series Bolt-Action Rifles
    Replies: 5
    Last Post: 07-20-2010, 04:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •