Results 1 to 12 of 12

Thread: Brass it sticking in chamber after being fired

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-19-2014, 11:36 AM #7
    scope eye
    Status
    Offline
    Basic Member scope eye's Avatar
    Join Date
    May 2008
    Location
    Sebring FL
    Posts
    2,795
    Check the headspace, some will say it has nothing to do with it, take my word for the time and cost it takes to do it there is no excuse, when the headspace is not right it creates all kinds of symptoms, if it is on the tight side loosen it up a bit, and if it is on the loose side tighten it up a bit, there is no rhyme or reason, it just fixes a lot of weird problems, or has sent me in the right direction to fixing the problem, by the way it is reacting to the changes in headspace, it's only time your call

    Dean
    Last edited by scope eye; 01-19-2014 at 11:43 AM.
    RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Help please, case neck sticking on chamber edge when closing bolt. Poorly drawn pic.
    By doodedge in forum Axis Series Rifles
    Replies: 17
    Last Post: 01-12-2016, 10:47 PM
  2. Unable to chamber once fired brass
    By MS50 in forum Ammunition & Reloading
    Replies: 40
    Last Post: 04-16-2015, 07:57 AM
  3. Once fired will NOT chamber!
    By SuperKaos in forum Ammunition & Reloading
    Replies: 33
    Last Post: 12-22-2013, 08:11 AM
  4. Trouble with brass sticking when fired, .243
    By skoger in forum 110-Series Rifles
    Replies: 15
    Last Post: 01-04-2013, 10:06 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules