I've never had that problem.
Is it headspaced correctly???
I have a model 12 in 204 that i converted to a 22-250. I put a 28" McGowen barrel on it with a 1 in 9" twist and changed the bolt head on the bolt. When i fire the gun, the firing pin is not stricking the primer. I have no idea what the problem could be. Any ideas?
I've never had that problem.
Is it headspaced correctly???
Check your firing pin protrusion and check your accu-trigger pull weight to be sure it's not jumping off the sear when the bolt is closed.
Bookmarks