Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 14 of 14

Thread: 22-250 Axis with new stock.

  1. #1
    Basic Member
    Join Date
    Apr 2011
    Location
    Peoria, AZ
    Posts
    74

    22-250 Axis with new stock.

    I finished my 22-250. Hope you like.







    It has the 4 round mag

    [img width=512 height=768]http://i1061.photobucket.com/albums/t463/rsg-/DSC01946.jpg[/img]

    RSG

  2. #2
    Basic Member 03mossy's Avatar
    Join Date
    Jan 2010
    Location
    Minnesota
    Age
    38
    Posts
    681

    Re: 22-250 Axis with new stock.

    very very nice!!! What kind of wood is that?

  3. #3
    Basic Member
    Join Date
    Apr 2011
    Location
    Peoria, AZ
    Posts
    74

    Re: 22-250 Axis with new stock.

    It is Baltic birch with a walnut stain and poly finsh.

    RSG

  4. #4
    Team Savage
    Join Date
    Sep 2011
    Age
    55
    Posts
    293

    Re: 22-250 Axis with new stock.

    Very nice and clean looking!! Good job!!

    DK
    [B]Savage 10FCP 6mm Creedmoor - MOΛΩN ΛΑΒΕ - ][][][%[/B]

  5. #5
    Team Savage
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507

    Re: 22-250 Axis with new stock.

    Nicely done..... Now that you've finished practicing on that one, are you ready to start on mine? I mean, after all,.... I have been waiting quite a while

    Very nice! What ever your skill or profession is, at least you know you can always have a career in Axis / Edge stock making.

    I see you've taken your addiction to the next level. Well done!

    Frank in Fla
    'Scuse me while I whip this out...!

  6. #6
    Team Savage
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507

    Re: 22-250 Axis with new stock.

    By the way, What's that round yuk-a-puk on the barrel? Is that one of those vibration damper thingies I read a little about?

    Last stoopid question. Does it work or do whatever it's supposed to do?


    Frank in FLa.
    'Scuse me while I whip this out...!

  7. #7
    Basic Member
    Join Date
    Apr 2011
    Location
    Peoria, AZ
    Posts
    74

    Re: 22-250 Axis with new stock.

    I won the rifle in a raffle and a door prize too. The door prize was the yuk-a-puk (love the name) and slip-on recoil pad. Does it work? It hide the 1 inch barrel channel it work for that. ;D

    RSG

  8. #8
    Basic Member
    Join Date
    Sep 2011
    Posts
    132

    Re: 22-250 Axis with new stock.

    Hey, very nice work. I like the way you installed the mag, I've seen this somewhere ;D

  9. #9
    Team Savage
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507

    Re: 22-250 Axis with new stock.

    Hey RSG - I was at the range today & noticed the guy next to me was shooting a Rem .243 with one of those yuk-a-puks on the barrel.
    I struck up a discussion about it, asking what it did. He responded with what he thought it was supposed to do & said it didn't do anything.
    10 minutes go by & he's standing behind me saying "look at my target!", with an air of excitement to his voice. I swing my spotter over & notice his 1st target looked a little like a tight buckshot pattern - His second target - Nice grouping!

    He's shooting 100gr Rem Core-Lokt store bought stuff & getting a nice tight .75" group.... TWICE!. If I hadn't seen this with my own 2 baby blues, I would have called BS in a loud clear voice.
    He said he had moved that gizmo about an inch at a time toward the muzzle. With it only about 2.5" away from the stock, this thing actually made a difference.

    Now, I'm not gonna run out & buy one tonight but, I would encourage you to have a go at it & let us know. It kinda sorta sparked my interest..... quite a bit.

    He even went over to one of the 200yd lines and came back with a target that had a tight, real tight 1" pattern of 4 shots, dead nutz center of his target.
    I would really like to see if there's any consistancy to those yuk-a-puks or whatever the heck they are called.
    Let me / us know. It is kinda amusing, to say the very least, that the accuracy of a rifle can be modified in a positive manner by adding & adjusting a rubber gadget on the barrel.
    Thanks for listening.
    Frank "easily amused" in Fla
    'Scuse me while I whip this out...!

  10. #10
    Basic Member
    Join Date
    Apr 2011
    Location
    Peoria, AZ
    Posts
    74

    Re: 22-250 Axis with new stock.

    Bobfortiers pics helped me with my stock build, I added some that I hope will help someone else.
    I was worried about the action to bottom of mag latch .765 dimension, I made the washer and pillar as one. This is the drawing I made for it.



    I added a alum plate to the rear of the mag bend part. Hooking to the wood seamed weak.





  11. #11
    Basic Member
    Join Date
    Apr 2011
    Location
    Peoria, AZ
    Posts
    74

    Re: 22-250 Axis with new stock.

    I milled the trigger guard out of a .75 x 1.50 block of alum.





    Hope this will help you if you make a stock too.
    RSG

  12. #12
    Basic Member thomae's Avatar
    Join Date
    Feb 2011
    Location
    Centre County, PA
    Age
    60
    Posts
    1,969
    Here's the missing image that shows the magazine from the bottom.
    I copied and modified the picture link to work with the new forum.


    Confido autem verificare

  13. #13
    Team Savage
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507
    Geezz.... That looks more like a show piece or a piece of furniture. it's too nice looking to shoot.

    I like the way you made the hand grip part thicker. That's the problem I have with my "Flexible Flyer". It's too small in diameter for my monster mits. I spent a considerable amount of time doctoring my Edge stock to make it less flexible. It's good 'n stiff but feels too short & small to me.

    Ok.... now you've heard my complaints, you know what i need for the stock you'll make for my 25.06.... Carpathian curly maple for wood will be OK.

    Y'all have a safe 4th of July.

    Frank in Fla
    'Scuse me while I whip this out...!

  14. #14
    Xaved
    Guest
    RSG, i sent you a private message - I'm not sure if it got sent though...

Similar Threads

  1. Axis Stock Art
    By wbm in forum Picture Post
    Replies: 15
    Last Post: 08-28-2017, 05:55 PM
  2. Axis Stock
    By SThomas3791 in forum Axis Series Rifles
    Replies: 6
    Last Post: 11-19-2014, 02:48 PM
  3. A Way to Get a Wooden Axis Stock Target Stock
    By gmruehle in forum Axis Series Rifles
    Replies: 36
    Last Post: 07-23-2013, 07:21 PM
  4. Replies: 1
    Last Post: 05-05-2013, 05:29 PM
  5. Can you cut the Axis Stock?
    By HaroldB in forum Axis Series Rifles
    Replies: 5
    Last Post: 09-13-2011, 12:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •