Two Different Center-feed Inlets for Bottom Metal

Top? Has the photo been rotated? Is left top? Very confusing.

I too am a little confused with the picture. I was thinking the right one was top. Great timing on this article, I'm about to order a bottom metal to replace my plastic that's on there now (trophy hunter xp). Do you know which one that savage currently sells now? Or are they both available and fit different models?
I've acquired 2 different part numbers for this part.
The first I found on this site that was given a couple of months ago to someone who also was upgrading their plastic to metal.

FRAME ASSY SHORT MATTE (DBM)
PART NUMBER: 106238
$68.00



Then Savage customer service gave me this
FRAME ASSY, SHORT MATTE NBR (DBM)
PART NUMBER: 106705
$78.00

Anybody know what the difference is and what NBR stands for? Maybe different finishes? I need the blued

I want to thank you for doing this but could you expand a little? I have talked to Savage and Boyds and get two different answers. Savage said Boyds is respondsiible for telling me which bottom metal they used for inleting the stock and Boyds told me to order the bottom metal from Savage that they would know the part numbers. Savage was a little more help in that they cross referenced the parts I needed to a Model 10. I have a 16 Trophy Hunter XP. Also said that if they didn't work I could ship them back. I just wish someone could tell me exactly what i need.

Thanks

I just ordered 106705 referencing my 10 Predator Hunter Max 4.4 bottom bolt release serial number that is blued steel. (not received yet) The dimensions are identical to my 10 Trophy Hunter 4.4 bottom bolt release plastic. The Predator has an Accustock and the Trophy a walnut.

H 338LM with all metal what info are you looking for my metal from factory is Accurate-Mag. mag hole spacing is 5.125 front trigger lug to front metal.

Be aware that the "tab" on the rear of the frame assemblies (front TG/rear action screw) has evolved as well.
Older tab is taller to match the older narrow TG ; newer tabs are shorter to match the fatter TG which has a raised tab on the front. From what I have seen this corresponds to the bottom bolt release parts in the TG.
In my experience the plastic parts (frame and TG) are all the later design.
The $68 frame assembly is what I bought tor the side bolt release DBM setups I did with the older narrow TG.
The $78 frame is what I got for my bottom bolt release rifle.
Here is a picture showing the TG's :
http://www.stockadegunstocks.com/3.html

Thanks

Hmmmm, maybe NBR means "new bolt release"...
Good a guess as any I think.

Any idea if the inletting on the left that accepts both bottom metals will also accept a cdi bottom metal , I ask because I need to order both a new stock and new metal .

Here are some serial numbers to search and relevant part numbers:

SN	Model	Action	Finish	Cal	Frame Assy	Trigger Guard	Magazine
G800191	10FP	SA	Matte Blue	308 Win		106980
G800911	11FC	SA	Matte Blue	243 Win	106238	105417
G800701	10FCP McMillan	SA	Matte Blue	308 Win	106238	105417
G800991	10	SA	Brush	204 Ruger	107112	107312
G901021	10FLCP	SA	Matte Blue	223 Win	106705 (NBR)	107217	55155
G901441	11FCXP3	SA	Matte Blue	243 Win	106238	105417	55105
G901751	10FCP	SA	Matte Blue	308 Win	106705 (NBR)	107217	55105
G901341	14	SA	Gloss Blue	7mm/08	106704 (NBR)
G901181	16FCSS	SA	Stainless	243 Win	107325 (NBR)
G901340	16FHVSS	SA	Stainless	223 Rem	107086 (HFP)
G800841	111FC	LA	Matte Blue	270 Win	105857	105417
G901391	111FCXP3	LA	Matte Blue	30/06	105857	105417	55117
G901331	110FCP	LA	Matte Blue	25/06	106706 (NBR)	107217
G901339	116FCSS	LA	Stainless	270 Win	107324 (NBR)
G891791	111FHNS	LA	Matte Blue	270 Win	105877 (HFP)

NBR in the part name probably means "new bolt release." The older side release bolt guns all use the 106238 frame assy. The 106705 is for the bottom bolt release.

Originally Posted by multitoes

Be aware that the "tab" on the rear of the frame assemblies (front TG/rear action screw) has evolved as well.
Older tab is taller to match the older narrow TG ; newer tabs are shorter to match the fatter TG which has a raised tab on the front. From what I have seen this corresponds to the bottom bolt release parts in the TG.

Just to make this more confusing, I have a 10FP with a side bolt release and centerfeed blind magazine (ref S/N G901951). My trigger guard looks like what Stockade has labeled "New Style Trigger Guard" but it does not have the hole for the new bolt release. The part number is the same as shown for S/N G800191 in the part finder. The G800XXX's are when all Savage rifles were side bolt release. My trigger guard does not look like the one in the diagram displayed for my rifle in the parts finder.

So it looks like the trigger guard for some blind magazine, side bolt release guns will work with the new NBR style frame assy.

I plan to contact Savage - but - thought I might embellish my knowledge by posing question here also....................

Plan to build rifle (.308) McGowen bbl - boyd's blank. Want to inlet & install bottom metal for removable mag as per Savage mod 10 tactical (FCP-SR)

I can handle inletting just fine. Want FACTORY part(s). Any good advice among the bunch about dealing with Savage / procuring part(s) indicated?

I ordered all my mag parts on line ; A little slow getting out the door (3 or 4 days) but no surprise there considering their volume.
Reasonable flat rate shipping.
The key is whether parts are in stock...
BTW : Boyds now has stocks already inletted for Savage DBM's.

I think the 10 FCP-SR may use bottom metal from Accurate Mag. You can order it direct from Accurate Mag. PTG has less expensive AICS compatible bottom metal available.

Dennis: go to the Savage Arms web site under Store > partfinder. Put in a serial number from the list I posted above which has the bottom metal you want. You can pick which parts you want and order online.

The metal bottom parts are 100% nicer than the plastic ones. They weigh 7 ounces more.

Boyds sells the stock inletted for the one on the right which actually seems to be for a hinge plate. They say it is for a DBM, but my 106238 is not a direct drop in.