• Centerfire FAQ's

    by Published on 09-23-2012 05:03 PM

    Action screw lengths:

    Short set...used on "F"(tupperware stocks)
    front-1.100"
    rear-1.510" ...
     Number of Views: 7097 

    2003 - Savage introduced their new ACCU-TRIGGER. Besides the trigger change, the receiver now has a round top in the rear scope base area which uses the same base in the rear as in the front. The Weaver #46 base will fit both ends as well as the #402 extension base if you have a need for mounting extremely long or short tube scopes.
    ...
    Published on 01-23-2012 01:20 PM
    Article Preview

    The following measurements depict the various screw spacing on Savage 110 centerfire actions over the years. All measurements are center-to-center.
    ...
    Published on 01-23-2012 01:06 PM
    Savage Barrel Shank Sizes - standard on left, large on right.

    In 2002 Savage began offering rifles in the Winchester Short Magnum (WSM) and Remington Ultra Magnum (RUM) calibers. When these were finally in the catalog, there was a change made to the barrel shank diameter. Standard barrel shank diameter on standard calibers are 1.055" x 20tpi. On the new WSM, RUM, and SAUM calibers the shank diameter is 1.120" x 20tpi. ...
    Published on 01-20-2012 09:45 PM
    Article Preview

    Here are some of the different bolt head configurations used in the last several years and the most current.


    L to R
    short action (7/16" lugs)
    short action controlled
    ...

    Page 3 of 3 FirstFirst 123