View Full Version : Charger
Blue Avenger
12-02-2022, 10:53 PM
8787
cut down rifle barrel, front sight add back on.
see through scope mounts.
trigger parts changed.
likes wolf ammo which is hard to come by.
ragsflh
12-03-2022, 09:39 AM
good looking 22
Julesk
12-21-2022, 09:11 PM
My Kidd barrel is accurate with just about anything I put in it.
8949
61Knuckle
01-22-2023, 04:48 PM
Blue Avenger, I like that laminated stock, got the same color on a Striker. Try polishing the inside of the receiver lightly with a Scotch Brite and check your firing pin and extractor. I had a bent and burred firing pin in a new, unfired bolt, replaced with a new, flat, polished firing pin.
Just recently took my Charger build to the range for a test shoot before making a few more changes. It runs good, so far. Details: Charger action from S&P, Fedderson barrel, BX trigger, Enoch Deep Six chassis. The bolt and receiver have been cleaned up and de-burred. So far, no FTF or FTE with CCI SV or Norma ammo and initial groups were okay.
cknight814
01-22-2023, 07:04 PM
That's a nice Charger. I need to dig mine out of the safe and snap some pics of it
HHI6818
01-24-2023, 01:03 AM
I bought a Charger shortly after Ruger released them for kids to shoot IHMSA. Bought a Kidd 10 inch stainless barrel which made it a tack driver! Installed a Timney trigger and later upgraded to Kidd two stage trigger I had a Leo 2.5x8 EER scope on it but couldnt turn up magnification past 4x because eye relief tunneled down. Put a Burris 7x on it
https://i.postimg.cc/dtSScCth/48496E62-6422-4341-B5EC-F25E7EE7A385.jpg (https://postimg.cc/qzyG8zKr)
https://i.postimg.cc/PfwX9RpB/ED23FC37-394B-450E-B575-719B9DE41134.jpg (https://postimg.cc/HjT173t2)
Iowa Fox
01-25-2023, 02:10 AM
Jay, Who made that upper rail the 7x Burris is mounted to? Thanks
cknight814
01-25-2023, 10:05 AM
Jay, Who made that upper rail the 7x Burris is mounted to? Thanks
I was curious about the same thing!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.