Results 1 to 4 of 4

Thread: Got my 10-FCP back from the gsmith.

  1. #1
    bendigo78
    Guest

    Got my 10-FCP back from the gsmith.


    In a previous post I asked you guys what upgrades should be done to my new to me 10FCP Choate savage in .308. I had him shorten the barrel to 24", thread, recrown, and install a Mickulek brake. Also had a NSS oversized ground recoil lug installed and had the action bedded. I know the Choate A5 has a bedding block but figured alittle more surface area couldn't hurt. I mainly wanted the brake installed but since it was there the rest couldn't hurt. The rifle seemed to shoot 2 separate groups before with all rounds under an inch. Hoping the bedding and recoil lug would help this. Also I read on this forum that someone else thought that their crown wasn't finished. I looked at mine and couldn't see any trace of a crown.

    Anyway I got it back and the new scope on it just prior to a Pdog hunt and though I'd post a couple pics. Haven't had a chance to shoot groups yet but sighted it in on a couple dogs. Should have some group pics this weekend.

    [img width=600 height=339]http://i101.photobucket.com/albums/m77/bendigo78/gun/100_6874.jpg[/img]


    [img width=600 height=339]http://i101.photobucket.com/albums/m77/bendigo78/gun/100_6875.jpg[/img]

  2. #2
    bendigo78
    Guest

    Re: Got my 10-FCP back from the gsmith.

    A few Groups. The 190's seem a bit picky. Hope to get a load for the 208's figured out.

    [img width=600 height=450]http://i101.photobucket.com/albums/m77/bendigo78/gun/IMG00272.jpg[/img]
    [img width=600 height=450]http://i101.photobucket.com/albums/m77/bendigo78/gun/IMG00271.jpg[/img]
    [img width=600 height=450]http://i101.photobucket.com/albums/m77/bendigo78/gun/IMG00270.jpg[/img]

  3. #3
    Basic Member
    Join Date
    Jul 2009
    Location
    Johnson County,Tx
    Posts
    569

    Re: Got my 10-FCP back from the gsmith.

    Shooting P'dogs with a 308? And I thought I was overkilling them with my 25/06 w 75 grainers.

    I have that exact rifle.It has always shot great.
    Mine seems to like loads with Reloader 15 over Varget or any other powder.
    It loves 168 & 208 AMax's-best groups so far are .223 and .246 at 100yds

  4. #4
    bendigo78
    Guest

    Re: Got my 10-FCP back from the gsmith.

    Didn't shoot many pdogs with it. The only reason I took it was because it got finished the day before we left and I wanted to shoot it.

    I really want this rifle to shoot the 208's. The 190 smks seem to be difficult to group in .308s.

Similar Threads

  1. Accuracy potential flat back vs round back
    By coance in forum 110-Series Rifles
    Replies: 9
    Last Post: 07-11-2018, 08:43 PM
  2. Back with you again!
    By rbertalotto in forum Introduce Yourself
    Replies: 6
    Last Post: 01-09-2018, 07:58 PM
  3. I to am back again.
    By nobody in forum Introduce Yourself
    Replies: 4
    Last Post: 09-24-2016, 02:41 PM
  4. getting mag box back on
    By Kian in forum 110-Series Rifles
    Replies: 2
    Last Post: 06-28-2011, 06:26 AM
  5. round back or flat back receiver
    By snunty in forum Optics
    Replies: 7
    Last Post: 04-27-2010, 11:22 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •