metal mags ?

[Medic_01]

is there, or is anyone currently developing a metal box mag for the edge ?

[twopopper]

The only mags I have found are right from the facory, and they are always listed as out of stock. I would like an extra mag also, if you find anything please post it.

[sayak]

I have both a .223, and a .270 Edge, and I am unhappy with the factory mags on both. My .223 has dumped its mag, and my .270 does not feed if I don't put in the mag JUST RIGHT. Very frustrating and might be catastrophic if I missed a shot at a caribou. I sure hope someone comes out with an after market mag for each of the Edges, as the current ones are PsOC!

[sharpshooter]

The Edge magazine boxes are metal. Only the bottom cap is plastic, and it must be this way to latch in the stock. The metal magazine box is the same box used on the standard Savage and Stevens rifles.

[Medic_01]

The Edge magazine boxes are metal. Only the bottom cap is plastic, and it must be this way to latch in the stock. The metal magazine box is the same box used on the standard Savage and Stevens rifles.

i see, maybe a DBM is something that should be developed then.
give it time, surely something will crop up !

[JBK]

i know this is an old post but had to share cause i was really looking for a spare mag for my rifle also. yes savage lists them as out of stock but i called anyway to find out when or where they could be found and sales woman to me "owe know we have them" took my order and $40 and i had one in 5 days. hope this helps.

[eclipse71]

+1

The Edge magazine boxes are metal. Only the bottom cap is plastic, and it must be this way to latch in the stock. The metal magazine box is the same box used on the standard Savage and Stevens rifles.

Look steel to me, and DBM
You have to insert the rear end first, then clip the front.
Work flawlessly for me, I like it.

[img width=600 height=450]http://img27.imageshack.us/img27/6369/chargeur223004.jpg[/img]


[img width=600 height=450]http://img31.imageshack.us/img31/4593/chargeur223007.jpg[/img]

[img width=600 height=450]http://img411.imageshack.us/img411/6908/chargeur223008.jpg[/img]