Glass bedding pics?

[Jerms]

Im about to bed my stock but all the writeups I see are on Remington or Winchester actions. Anybody have any pics or writeups on Savage actions being bedded?

[davemuzz]

http://www.6mmbr.com/pillarbedding.html

[Lion]

Looking for pics?
Why don´t you try the Picture Post?
Greez, Lion

[Jerms]

http://www.6mmbr.com/pillarbedding.html

Did you actually read my post?

Looking for pics?
Why don´t you try the Picture Post?
Greez, Lion

Excellent! Thanks, I skimmed but didn't see this.

[davemuzz]

http://www.6mmbr.com/pillarbedding.html

Did you actually read my post?

Yeah....well, it was all I had in my reference library. It's not significantly different from a savage....and bedding isn't exactly brain surgery. And for your gun.....it's for sure thanking the gun gods for that.

Dave

[Jerms]

This Coming from a guy with an avatar like yours... ::)
It seems like it IS significantly different than a savage. It appears people are not bedding the rear of the action, unlike the rifle in the writeup you posted. Thanks for you contribution.

[drybean]

LOL! there is no diff. just float the rear tang
drybean

[davemuzz]

Thanks Drybean.....you hit the nail on the head.

And besides that..... I look even better on a close up!! Don't ya think? Mom always said I did!!!

So...be nice....and as I always say.....[img width=381 height=450]http://i12.photobucket.com/albums/a212/davemuzz/Watchurnutz.jpg[/img] Watch out for your NUTZ!!!!

[snowpro440]

You got no nuts squirrel... Ooops There in your cheeks !

[bgc]

When you say "Bed your stock" are you glass bedding the barrel channel for the full length? Or are you looking to bed just the action? What stock and action are you working with?

The 6mmbr article is an excellent article that touches several key points on bedding for accuracy. Keep everything as consistent as possible for maximum accuracy. I know this not what you're looking for, but below is a photo of a 10/22 we pillar bedded with Devcon.
[img width=600 height=449]http://i421.photobucket.com/albums/pp291/bcls430/Firearms/IMG_0613-1.jpg[/img]

[singlecoil]

Hey Dave, thanks for the link. One of the best I've seen on pillar bedding.

[bodywerks]

I've bedded a couple accustocks.
prep:
[img width=600 height=448]http://i813.photobucket.com/albums/zz53/bodywerks/accuwedge/IMG_20100826_200709.jpg[/img]
[img width=600 height=448]http://i813.photobucket.com/albums/zz53/bodywerks/accuwedge/IMG_20100826_200757.jpg[/img]
[img width=600 height=448]http://i813.photobucket.com/albums/zz53/bodywerks/accuwedge/IMG_20100827_163615.jpg[/img]
Bedded using devcon:
[img width=600 height=448]http://i813.photobucket.com/albums/zz53/bodywerks/accuwedge/IMG_20100828_190815.jpg[/img]
[img width=600 height=448]http://i813.photobucket.com/albums/zz53/bodywerks/accuwedge/IMG_20100828_190804.jpg[/img]
Another from my fcp-k accustock: