6mm lapua and slow burning powders

**Chameleoncamo** · 03-21-2011, 12:38 AM

looking at loading 105-107 gr bthp in 6x47 lapua using some slower powders

8 twist 26 inch barrel. not to much info out there that i could find.

**frank1947** · 03-25-2011, 12:30 AM

varget pretty popular in 6mm br not sure about 6x47 go to accurateshooter.com lot of good stuff on 6mm

**GaCop** · 03-25-2011, 07:35 AM

Also check out 6mmBR.com, good information there too.

**Nor Cal Mikie** · 03-25-2011, 07:49 AM

accurateshooters.com and 6mmBR.com are one in the same.

**GaCop** · 03-25-2011, 08:08 AM

OOPS! Your right! My bad.

**Nor Cal Mikie** · 03-25-2011, 08:12 AM

You knew it all along. You were just testing the rest of us. ;D

**GaCop** · 03-25-2011, 08:14 AM

Huh? Oh yeah, that's it!

**Nor Cal Mikie** · 03-25-2011, 08:19 AM

Think positive. ;D

**Chameleoncamo** · 03-25-2011, 07:00 PM

Thanks guys read all of that and most likely go that route. Curious if anyone has use rl-22 or 4831 or comparable powders.

Thread: 6mm lapua and slow burning powders