Reply With QuoteMay not have to shim on that one, I believe they make that ready to go for the centerfeed. Ussually you only have to shim if you are retro fitting a 4.27" to a newer 4.40" Centerfeed.
i have heard that when replacing stocks you may have to shim the magazine to make things fir and sit rite. i have recently gotten a choate tactical stock and am in need of help with the shim thing
May not have to shim on that one, I believe they make that ready to go for the centerfeed. Ussually you only have to shim if you are retro fitting a 4.27" to a newer 4.40" Centerfeed.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
i dont know exactly how the magazine is suppose to fit in the stock, but when i put it in the choate it can rock front and back. its like it sits too low in the front
That is possible I guess, I help my buddy put his model 12 in that stock for the centerfeed and his was tight. You may have to put a little shim material around the mag, possibly in the front or a little underneath. Trial and Error is the name of the game.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
thats what im guessing ill have to do is shove some stuff in there see where it loads and works best then figure out how to keep things in place
anyone done this i shot my new build today forming brass and testing seating depths and it was a pain to single fire with no mag or follower or anything there. need to get this done
looks like i am gonna have to convert to a single shot cant get this magazine to sit right. any suggestions either way magazine or single shot?
Posting Permissions
Bookmarks