Yes, it can be made to fit.
Since its for a LA the action screw spacing is the same either way, so that isnt an issue.
Basically the only issue you will have would be the area around the rear pillar that is relieved(on a centerfeed stock) to fit the magazine bracket. On a centerfeed the action actually sits on top of this bracket, so if you put a staggered action in there you will need to fill that gap in the stock.
-The easiest way to do it is to just bed the action, which will fill that gap in during the process. The other remedy is to glue in something to fill the gap, but bedding is a better fix IMO.
Bookmarks