Reply With QuotePut the rear tab in place....the one near the trigger. Take a flat head screwdriver at about a 45* angle where the front tab meets the mag box. Put the front tab in position and tap the screw driver with a hammer, mallet, etc...
Should pop right in
I have a staggered feed model 10 in .223 I'm changing to a 7mm/08. I managed to get the old magazine box off without destroying it, but I'm having a heck of a time getting the new one on.
Any tips?
Put the rear tab in place....the one near the trigger. Take a flat head screwdriver at about a 45* angle where the front tab meets the mag box. Put the front tab in position and tap the screw driver with a hammer, mallet, etc...
Should pop right in
That worked like a charm! Thanks!
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks