School me on barrels in .243 WSSM

[TacoBruiser]

The rifle will be used mainly for coyote and for some long range target. Someone has mentioned that I should get chrome lined. Will probably be going with 70gn Ballistic Tips. I would like a heavier contour. What twist, length and who makes barrels chambered for this round?

[snowgetter1]

I just mounted my Shillen 243 wssm today. I ordered it from Northland and it came in in about 3 months. It is a 28" straight 1" tube with a 1/8 twist. Hopefully I can shoot it this week. I have been thinking about the nitride treatment but I may just wing it and see how far it will go.

[snowgetter1]

ER SHAW also lists all wssm and wsm on their website.

[LSUBOY]

As soon as you figure out what you like in your barrel and the way it shoots, order yourself 1 or 2 more spares.......
Don't ask me why you should?

[sinman]

I have a mod 70 stealth II in it and I actually just cut one on my lathe

[snowgetter1]

Finally really got to shoot mine today. .25" group at 100 with Sierra 70gr HPBT and 760 powder. I shot a bunch on different loads and that was by far the best. I have to move it out to 200 next though. The only bad thing I could see with it is if used a hunting rifle the empties do not eject about 80% of the time. This is not bad for me with a single shot follower and just shooting targets. I built this on a Model 11 300 wsm large shank action.

[TacoBruiser]

Mine is also a model 11 .300 WSM. Does that mean its a large shank as well?

[snowgetter1]

I would think so if it is a new model for sure. Mine had a smooth nut, bolt release in front of the trigger guard, and there is a step down on the barrel from just in front of the nut. If it has all of those it is a large. Or you can call Savage and ask them. Just provide the serial number.