Which aftermarket stocks fit the Stevens 200 Centerfeed actions?

[TORCHRIDER]

Are there any aftermarket stocks (B&C, Mcmillan, etc.) that will fit the Stevens 200 CF actions without any modifications?

[usmc_mwroseberry]

as long as it's a short action any stock that will fit the model 10 or 110 will fit. examples (B&C medalist, Choate, XLR, ect)

Good luck,
Merritt

[TORCHRIDER]

Thanks. What about the blind centerfeed magazine? Will the stock support it without modification?

[68injunhed]

As long as the stock manufacturer specifies it will fit the newer centerfeed stocks with the 4.4" hole spacing, you're good. Most do not unfortunately. Stocky's has a few that do. I'm still waiting for Boyd's to offer a Classic that I don't have to mod. Probably be waiting for a while.

[sales@boydsgunstocks]

You should start to see the Centerfeed stocks in the next few months. I'll be sure to post it ;D

[GaCop]

Thanks, that's good to know.

[GaCop]

Is Boyd's ever going to make long action stocks for heavy barrels again?

[calib]

so far i have had real good results with my choat tactical. no bedding or anything

[rjsixgun]

You should start to see the Centerfeed stocks in the next few months. I'll be sure to post it ;D

If you tell promise to make a classic style,(no thumbhole) black&gray laminate stock for a standard barrel stevens 200 centerfeed 308.....then I will wait....if not I will buy from another stockmaker.

[JesterGrin_1]

I will be counting the days. As I need a Boyds Feather Weight Thumb Hole stock for my Stevens 200 4.40 action build into my 358 Winchester. So I am just waiting on the stock. :)

I have a Boyds Feather Weight Thumb Hole on my Marlin XL-7 turned into a 35 Whelen. :)

The other designs of stocks are fine But if you have a Mag or Heavy Mag contour barrel there really is not enough material there to enlarge the barrel channel. But on the Thumb Hole stock there is. :)