30:06 long action

[nuclabuyer]

I have a Long action with a 30:06 bolt head on it. I dont want anything in the 30:06 family, ie 30:06, 280, 270, 25:06 etc. Is there anything else that takes that size of bolt head that is long action. Main reason is I already have a 30:06, 270, 25-06. I am thinking of trading it for a mag head, I was hoping a 375 head would fit but I dought it. What other long action take a :06 size bolt head

thanks

[trappst]

Not sure what kind of power you're looking for but....

fast twist 6mm Rem loaded with long VLD style bullets would be great!!! Or the Ackley Imp. version of course

[keeki]

http://www.gunnersgear.com/savage_pi...head_sizes.pdf

this should help

[keeki]

I think a 375 rimless does use this bolt head

[geargrinder]

You could do a 375RUM with a magnum bolt head.

[nuclabuyer]

I new that list was some where, I have seen it a couple places before but for what ever reason I could not find it. I didnt really see anything on the list that sparked my interest. I did forget to mention that this is going on a remington 700 with the new barrel nut setup. I am looking for a barrel to order from Northland. I also talk to Devin, he might be able to do a little bolt work and open the bolt up to fit a mag case.

I was thinking about the 375 ultra just to have one. I dont have anything in the .375 familty. I have a 323, 338 and 40 cal so I guess I NEED a 375. I looked around a little and found that they have 403gr bullets that acually look like it can be more of a long range round then the "up close and personal" like I believe it was made for. Does anyone have any first hand experiance of what a set up like this would do??
They have some pics on the long range shooting website. They are shooting them from a 375-408 cheytac which I beleive has quite a bit more punch. But it would still be cool. Just dont want to waste money on an expensice POS.

http://www.longrangehunting.com/foru...t-tests-32926/

[keeki]

break your collarbone,lol

[nuclabuyer]

Just make it heavy and put a really good muzzle break on it

[ESSCEE]

I found this over on LRH I used it to purchase a savage for my first build 7mm rem mag to a 338 edge. Just starting. I am sure that all the much smarter people on here than I am will disprove any that may be wrong. good luck.

Scott

THE COPIED POST FROM LRH FOLLOWS:

Some times when considering a rebarrel and chamber or cartrige change you need to
know what round will work without boltface and extractor work.

I have a cheat sheet/ready reference and thought I would share it with every anyone
that is interested.

All of these groups of cartriges should interchange without bolt face and extractor
work.( some work on recever rails may be needed to improve feeding ).

As far as wild cats what ever the parent case was it should work in the action listed.

I know this list is not complete but it's close.

Short actions with a bolt face .Dia of .384 +/-
17 Rem, 204 Ruger. 222 Rimingtion, and 223 Rem.

Short actions with a bolt face .Dia of .470 +/-
225 Winchester, 22/250 Remingtion, 6mm Norma BR, 243 Win, 250 Savage, 260 Rem,
6.5/284 Norma, 7/08 Rem, 284 win, 300 Savage, 308 Win, 338 Federal, 35 Rem, and
the 358 Winchester.

Short actions with a bolt face .Dia of .540+/-
223 WSSM, 243 WSSM, 25 WSSM, 7mm Rem saum, 7mm WSM, 300 Rem saum, 300
WSM, 325 WSM, and the 350 Rem Mag.

Long actions with a bolt face .DIA of .470 +/-
220 Swift, 6mm Rem, 240 Weatherby Mag, 257 Roberts, 25-06 Rem,
6.5x55 Swedish, 270 Win, 7x57 Mauser, 7x64 Brenneke, 280 Rem, 30/06 Springfield,
8mm Mauser, 338/06 A Square, and the 35 Whelen.

Long actions with a bolt face .Dia of .540 +/-
257 Weatherby, 264 Win Mag, 270 weatherby Mag, 7mm Rem Mag, 7mm Weatherby Mag, 7 STW,
7mm Rem Ultra Mag, 300 H & H, 300 Win Mag, 300 Weatherby Mag, 300 RUM, 303 Brit,
8mm Rem Mag, 338 Win Mag, 340 Weatherby Mag, 338 RUM, 375 H & H, 375 Weatherby,
375 RUM, 416 Rem Mag, 458 Win Mag, and the 458 Lott.

Long actions with a bolt face .Dia of .585 +/-
30/378 Weatherby, 338 Lapua, 338/378 Weatherby, 378 Weatherby mag, 416 Rigby,
416 Weatherby Mag, 460 Weatherby Mag, and the 470 Nitro Express.

I hope this information helps in deciding what your next build will be and minimize some
of the cost.

[Blue Avenger]

http://www.gunnersgear.com/savage_pi...head_sizes.pdf


you just have little 06 stuff, where is the 338-06, 35 whelen or 400 whelen?

[Eric in NC]

http://www.gunnersgear.com/savage_pi...head_sizes.pdf


you just have little 06 stuff, where is the 338-06, 35 whelen or 400 whelen?

Skipped the best - 375-06AI and 9.3x62mm