They do not make the metal guards with the extension on it.
I dont know why they made the newer Medalists for use with that. A Dumb idea IMO as they inletted it for a Stevens trigger guard but also cut the barrel channel for a varmint barrel, which a Stevens dont have...
Anyway, go to the hardware store and buy about 4 or 5 small washers(I believe they are 1/4"), stack them up in the trigger guard opening and test fit the guard till it is flush with the stock(or as close as you can get it). Then take some super glue or heat shrink them together to make a one piece spacer. I left mine loose but you can also super glue it to the trigger guard if you like.
Only other option is to re-use the cheap plastic trigger guard.
Bookmarks