Results 1 to 12 of 12

Thread: trigger swap questions

  1. #1
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    trigger swap questions


    i have a stevens 200 and was wanting to remove the trigger. just wondering how much and how to remove everything so that i could put in a sss comp trigger.

  2. #2
    Super Moderator Blue Avenger's Avatar
    Join Date
    Dec 2006
    Location
    Minnesota
    Age
    65
    Posts
    2,972

    Re: trigger swap questions

    just the center pivot pin. and the wire spring
    .223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor

  3. #3
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    Re: trigger swap questions

    so i should have the actual trigger piece, the e clip, the pin the e clip hooks on to, the wire bar spring from the side. do i need to take the screw tentioner for the spring off also?

  4. #4
    68injunhed
    Guest

    Re: trigger swap questions

    I haven't ever actually looked at the SSS trigger, but unless installing it requires you to remove the tension adjustment screw, you might as well leave it where it is.

  5. #5
    Super Moderator Blue Avenger's Avatar
    Join Date
    Dec 2006
    Location
    Minnesota
    Age
    65
    Posts
    2,972

    Re: trigger swap questions

    keeps it from falling out some day with out the spring to hold it from rotating.

    [img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/gunsmith/reargripstriker011.jpg[/img]

    .223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor

  6. #6
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    Re: trigger swap questions

    thanks for the pics that is how i have it rite now i left the screw tentioner in and everything that is out in your pic is out in mine. now wait on the comp trigger to get here

  7. #7
    Basic Member
    Join Date
    Dec 2006
    Posts
    102

    Re: trigger swap questions

    You will have to notch the trigger bracket ...

    Look at the two pictures in BlueAdvengers post, top picture has a notch in the back of the trigger bracket, bottom does not.

    Notch is required to mount SSS trigger.

    Also, trigger gaurd will require removal of some materal so that the SSS trigger will clear.

    Just an FYI as these two things surprised me on my first SSS trigger install.

  8. #8
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    Re: trigger swap questions

    i have heard before about the notch. the trigger material if it where a problem where would that be in the gaurd or the housing?

  9. #9
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    Re: trigger swap questions

    dwm i looked at my stock trigger metal and i dont see anything different between mine and the one in the pics. where if the notch is there any posts with pics on here?

  10. #10
    Basic Member
    Join Date
    Dec 2006
    Posts
    102

    Re: trigger swap questions

    The trigger will come with instructions how to notch the trigger bracket / hanger.

    The trigger housing itself sometimes hits the trigger guard when you try and install the stock after installing the new trigger.

    You have to remove some material from the trigger guard also.


  11. #11
    Basic Member calib's Avatar
    Join Date
    Jan 2010
    Location
    spokane, wa
    Posts
    625

    Re: trigger swap questions

    oh well i will just wait then tell the trigger gets here.

  12. #12
    Super Moderator Blue Avenger's Avatar
    Join Date
    Dec 2006
    Location
    Minnesota
    Age
    65
    Posts
    2,972

    Re: trigger swap questions

    Depends on age of guard some clear some don't.
    .223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor

Similar Threads

  1. Striker 516 stock, trigger, caliber swap questions
    By JClark in forum Bolt Action, Falling Block & Rotary Breech Pistols
    Replies: 1
    Last Post: 07-08-2016, 02:51 PM
  2. Questions on Barrel Swap
    By Jet in forum 110-Series Rifles
    Replies: 1
    Last Post: 06-20-2013, 09:45 PM
  3. Bolt swap questions
    By The Pickle in forum 110-Series Rifles
    Replies: 1
    Last Post: 02-10-2012, 06:05 AM
  4. barrel swap questions??
    By huntinman57 in forum 110-Series Rifles
    Replies: 19
    Last Post: 10-28-2011, 06:23 AM
  5. VLP barrel swap questions
    By Tnslim in forum 110-Series Rifles
    Replies: 3
    Last Post: 11-01-2010, 10:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •