Reply With QuoteI haven't done it on an HS, but I have on cheaper stocks, no issues. . . Don't worry about it, just use a good bit and you should be fine.
I am thinking about putting a Karsten cheekpiece on my Savage 10FCP HS Precision, but honestly I'm a little nervous. How strong is this stock? It's not going to crack or anything when I drill the holes, right? And also, if anyone has done this on this stock, is the butt area hollow? Thanks in advance
I haven't done it on an HS, but I have on cheaper stocks, no issues. . . Don't worry about it, just use a good bit and you should be fine.
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
I wouldn't have a problem doing it on a normal plastic synthetic stock, but I'm wondering if anyone has done it on a fiberglass stock like the HS Prec.
I did it on a Duramaxx, it's fiberglass. . .
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
Sorry, I didn't know that's what you meant by synthetic. I didn't mean that disrespectfully. Thanks for the advice, I'll just buy a new drill bit to be sure :) I would hate to mess up that stockThanks again
No disrepect, I wasn't clear!
I would suggest masking taping the stock where you will drill though, should help minimize chipping around the hole.
Yeah, HS is worth being cautious with, I agree!
Adam
Romans 10:9 "That if you confess with your mouth, Jesus is Lord, and believe in your heart that God raised him from the dead, you will be saved."
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks