Results 1 to 5 of 5

Thread: Model 11 LRH problem

  1. 12-31-2010, 10:36 PM #1
    volunteerbee
    Guest

    Model 11 LRH problem


    I just bought a LRH in 300 wsm and was just checking to see if the fired brass from my model 16 would work ok in this rifle. The brass was Full Length sized and when I load the shell the brass rubs the front end of the receiver putting a massive,deep scratch in the brass.this rifle is still unfired and NIB. Anyone else had this problem or heard of anyone with this issue. Any help would be greatly apprecieted.
    Reply With Quote Reply With Quote
  3. 01-01-2011, 12:34 PM #2
    Armed in Utah
    Status
    Offline
    Basic Member
    Join Date
    Dec 2006
    Location
    Utah
    Posts
    292

    Re: Model 11 LRH problem

    I'd clean it completely before firing or cycling brass...

    especially the chamber....
    S/shot Savage & heavy Pac Nor's rock !! 'JM' Marlin lever gun nut !
    Reply With Quote Reply With Quote
  4. 01-02-2011, 02:38 PM #3
    volunteerbee
    Guest

    Re: Model 11 LRH problem

    ok thanks for the info.
    Reply With Quote Reply With Quote
  5. 01-02-2011, 07:10 PM #4
    Eric in NC
    Guest

    Re: Model 11 LRH problem

    Are you feeding "empty" brass from the mag? If that is what you are doing - there is your problem.
    Reply With Quote Reply With Quote
  6. 01-05-2011, 10:24 PM #5
    volunteerbee
    Guest

    Re: Model 11 LRH problem

    I'm feeding resized brass with a bullet stuck in the end of it to check OAL. I don't have any gauges to check this with.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Shotgun: Model 67 Problem
    By LHitchcox in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 2
    Last Post: 05-22-2016, 08:54 PM
  2. Model 10 FCP-SR PROBLEM
    By bl-u13 in forum 110-Series Rifles
    Replies: 4
    Last Post: 05-18-2016, 01:06 AM
  3. I need help with a model 12 vlp dbm problem.
    By fiveforfive in forum 110-Series Rifles
    Replies: 7
    Last Post: 02-07-2015, 04:52 PM
  4. Savage Model 110e .243 bolt problem?? firing pin problem?
    By midwesthunt in forum 110-Series Rifles
    Replies: 5
    Last Post: 10-16-2013, 01:26 AM
  5. Model 16 Feeding problem diagnosed. Now to solve the problem!
    By 762X51 in forum 110-Series Rifles
    Replies: 5
    Last Post: 02-02-2012, 12:33 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules