Got my "Bling" back.

[gt40]

This is what SSS & Kevin Rayhill did:

http://forum.gon.com/showthread.php?t=591016

gt40

[Uncle Jack]

Looks great. How does it shoot.

uj

[gt40]

I have shot 5 shot groups smaller than this one at 400 yds.

http://forum.gon.com/showthread.php?t=564977&highlight=

gt40

[sims5]

Very nice looking rifle, shoots good too. What did you use for the pattern when you painted the stock? Almost looks like snow fence.

[gt40]

Very nice looking rifle, shoots good too. What did you use for the pattern when you painted the stock? Almost looks like snow fence.

Look here and you will see how I did it:

http://forum.gon.com/showthread.php?t=366263

gt40

[macon]

gt 40 how did you get the netting to show up on the stock

[sims5]

Click on the link again.....1st time didn't show anything about the pattern. Now it shows a netting, looks like a volleyball net.

[gt40]

This is where I got the netting and the picture with the quarter is the netting I got. http://www.ahh.biz/products/netting%...t%20FHM022.htm As for how I did it was to paint the stock black first then put the netting on then Sprayed sand color lightly from at least 12 inches away. When this dried I did the same with camo green then flat black. The sand went over all the stock, but the other colors were just "sperts" in short lines at different angles. Remember if you spray to close or put to much paint on it will get under the netting and will not leave the netting pattern which is the first coat of black.

It is very easy to do. It only took about 3 hours including drying time except I also put 3 coats of matte clear Krylon which took at least 1 week to cure and not be tacky. All the paint was Krylon.

gt40

[sims5]

Thanks for the info GT40