this is a long action rifle in 223 cal.
i put in a new extra but it fails to
hold on the case. All military brass if
that makes a difference. its a pita...thanks
this is a long action rifle in 223 cal.
i put in a new extra but it fails to
hold on the case. All military brass if
that makes a difference. its a pita...thanks
Are these reloads? All the same lot of brass? Have you tried any factory ammunition or other cases? Did the Extractor come with the larger bearing ball that goes under it, or are you still using the factory 1/8” steel ball?
probaby the small ball..
Ok….. how about the other questions I asked? I’m sorry, but we can’t help if you’re not giving us information. In addition to my other questions above, does your bolt have the 223 Front Baffle like the picture below?
Has the rifle ever functioned properly?
Did you build the rifle?
Depending on the year of the bolt head you may have the wrong extractor. Look to see if the extractor is partially in the bolt head bore where it will grab the lip of the case.
The Dunning-Kruger effect is alive and well.
As always, a picture would would be helpful.
It's a long action and yes
It grabs the case good
Just doesn't hold on. As
Soon as it clears the chamber
It lets go. I got a good deal on
This
I really don't like the long
Action. I use it for cast bullets
Only.
Thanks
No the bolt is not like that.
Posting Permissions
Reply With Quote
Bookmarks