I have a savage 110c series J and was having some slight issues with the casing extraction. I removed the extractor to examine the ball and this is what I found, is this normal, can't seem to find anything about it.
I have a savage 110c series J and was having some slight issues with the casing extraction. I removed the extractor to examine the ball and this is what I found, is this normal, can't seem to find anything about it.
Is what normal??
My understanding is that there's supposed to be a round detent ball under the extractor, what I have here is sort of a cone shaped cylinder, that is what I am asking about being normal.
We can’t see what you have.
Under the Extractor, yes, there should be a steel ball directly under it, then a spring. I have no idea what you mean by a cone shaped cylinder??
The factory uses a .125” steel ball, but one of the long term members here (sharpshooter), figured out using a .140” bearing ball works better. So aftermarket kits use those. I recommend rebuilding the bolt head with one of 2 kits. Either the Lumley’s or Kinney’s.
https://lumleyarms.us/parts-by-make-...or-ejector-kit
https://kinneysshootingsupply.com/ss...r-ejector-kit/
Extraction fail at the beginning, trying to break it loose from the chamber? Or at the end, falling off the bolt before ejection?
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
The piece above the spring.
From the original picture, it is the piece above the spring. (cylinder with cone head), no ball.
Guess you can't see the pic. Trying to figure out how to put one in.
Oh jeez… No… there are NO pictures.
Try using https://imgbb.com/ Upload your pictures then click the picture and from the menu of links, copy the BBCode link. And paste the link right in your posts. The BBCode will paste as a link, but when you post your message it will show up as a picture.
Bookmarks