Never used a chassis or aics magazines. If i was to buy one of these https://mdttac.com/hnt26-chassis-system/ would it be as simple as dropping an ultralite into this chassis and popping in an aics mag? Is there some compatibility issue im missing? Or could i just take an ultralite out of its stock, put it in here and be set?
Didn’t I recommend this in another thread?
The answer is yes! It is that simple! Some might think the most difficult part is shelling out that kind of coin! But it really is just as you said. Remove Action screws, remove barreled action from factory stock, seat barreled action in new Chassis & install/torque action screws. Then use any one of the appropriate I AICS mags you wish. By
The only thing I would caution is to make certain you are a true Savage fan before spending so much. Because you will never the money back from the large bulk of modifications. Remember, just because Savage sells something similar $3300, doesn’t mean yours is now suddenly worth that to sell. I’m in the same boat! But I’ve never once worried about resale value. You
Thanks, resale value isnt a concern. Just want to try out the chassis thing. Putting it on my predator rifle. 16" 223 wylde.
Oh, it’s a 223? Ok, I would call them before you order. They don’t list the 223 AICS Mag as fitting the HNT26. It may be because it’s so new. I would give them a call first to see what magazine is used.Originally Posted by Wilhelm Scream
Didnt even think of that. Well if it wont work with the 223 mags, ill use it on my 243 or 308. No big deal.
Just called and asked, they said im good to go for the 223 mags
Posting Permissions
Reply With Quote
Bookmarks