After Market Bolt Handles

**centershot** · 12-28-2023, 12:21 PM

I looked at the FAQ section to see some of the bolt handles available. The one from SSS looks fine, but the last time I ordered from them there was no feed back in regards to shipping or order processing. I actually ordered two items and only received one.
So who, besides Savage, makes them? Northland has one but it is too short.

**Dave Hoback** · 12-28-2023, 12:54 PM

There are many. A quick Google Image search gives about every one. Here are a few.

Glades Armory has Right/Left handed and even Round/Flat rear Receiver. (I prefer the flat regardless)
https://gladesarmory.com/product-cat...-bolt-handles/

Lumley makes a Titanium bolt handle. This is my favorite.
https://lumleyarms.us/savage-titaniu...dle-right-hand

Anarchy
https://www.anarchyoutdoors.com/sava...andle-upgrade/

**pdog06** · 12-28-2023, 01:58 PM

Stockade Gunstocks has a really nice one as well.

**centershot** · 12-28-2023, 02:55 PM

Thanks for the suggestions.

**Ramstud41** · 12-28-2023, 05:22 PM

If you are looking to just get a bigger knob, then MDT Tac makes some clamp on bolt knobs. I don’t have one yet but probably will try one

https://mdttac.com/mdt-bolt-knob/

**Andrew863** · 12-28-2023, 08:54 PM

I have the glades armory bolt handle on my 338 and it has done very well. I liked the look better then the square version. I like the looks of the SSS handle but had heard of other shipping issues.

**South Prairie jim** · 12-28-2023, 08:59 PM

The last one I bought was from iirc “extreme hardcore gear” it wasn’t a large oversized handle because I don’t believe they are necessary, rather a very nicely machined part that polished up quite well.

**pdog06** · 12-28-2023, 10:54 PM

Thanks Dave.. I ordered a titanium handle from Lumleys today to try out for a target action build I’m getting ready to do.

**Dave Hoback** · 12-29-2023, 12:12 AM

Awesome. You’ll like it.

**pdog06** · 01-02-2024, 05:27 PM

I Ordered the Lumley bolthandle from Lumley on the 28th and received it in the mail today! Not bad. 5 days with a holiday weekend mixed in.

Dave is right! These handles are very nice! And very lightweight compared to the factory and other aftermarket options.

**Handi204** · 01-02-2024, 09:13 PM

I would avoid SSS at all took me four years to get a bolt handle and bolt head, the bolt handle finish is coming off, rattle can paint job lasts longer.