I used to use the MDT TAC21 chassis. I’ve since switched to a Mirage URL chassis, and also doing a rebarrel. Yo go with the rebarrel, I also machined a new Titanium recoil lug. My Mirage Chassis can fit a larger lug so the one I made is nearly full Action width. (Like 1.320”
roughly). But I can tell you the TAC21 will fit the standard lug. I was using a PT&G .250” non-tapered lug. (Pictured below) it did. Need to be shortened a bit. But that slight fitting is normal.
PT&G .250” lug on the left. My machined Titanium Lug on the Right.
Bookmarks