That’s pretty much all you need. You can get Savage pre-fit barrels, barrel nuts, recoil lugs, go/no go gauges and tools from Northland Shooters Supply. Really good group to work with. Just remember the target action should be a large shank but verify. For a trigger you will have to decide on whether you want an accutrigger, a red blade accutrigger or aftermarket. As far as I know, all of the aftermarket triggers use the factory sear except the Jard, so you will need to buy that separate. Gun shack.com is a good source for the sear as well as bolt heads, firing springs, etc. the stock may be the hardest item to locate, especially for a 3 screw target action. Most aftermarket stocks are set up for magazines. Sharp shooters supply sells stocks for the target action but I don’t know how long it will take to get one. You may be able to fine one used. You need to measure the distance between the outer 2 most screws because Savage has used 2 that I know of.
l’ve got a couple of accutriggers, I’ve got an Accustock that is set up for a drop box magazine (4.4 spacing) and I’ve got a Savage benchrest stock (3.4 spacing) I would be willing to work a deal on if you are interested.
Bookmarks