So I have more time than money and a mill and lathe. I bought a 6.5 creed at walmart for 2 Benjerman's. I built an aluminum chassis and screwed on a criterion 28'' 1.7.5 twist barrel. My first outing at 34.6 gr. of varget for 50 rounds was ES of 5 at 2905 average 108 bergers. This was 2 sessions of the same load. There was light extractor marks on some. Primers were not bad at first and worse later each time. Primers were cci 400.

Are axis actions notorious for showing signs of premature pressure? Thoughts