Results 1 to 11 of 11

Thread: Little machine time

  1. #1
    Basic Member
    Join Date
    Nov 2022
    Posts
    56

    Little machine time


    I have been fully retired now for over a year...thus its been a year since I built a single shot. Well I wasn't able to buy what I wanted so I had to stroll out to the shop and fire up the machines. A few hours of re leveling and truing the machines....and then just a couple hours of work I produced my new backpack hunting single shot.[br][br]I had factory ammo availability on the mind so I don't have to hand load unless I want to, lighter weight for packing deep into elk/mule deer country, and a shorter overall set up to fit in my Exo K3 pack and be protected. Revolver hunting is 99% of what I do but sometimes you need to poke just a little farther...[br][br]I chose 308 Winchester for the chambering which is one of the most available cartridges even during shortages and it packs plenty of punch for the western critters I'm hunting. A Brux 1-10 barrel, Mico Bastard brake, Unknown foam core stock, Trijicon Credo optic, EGW base, Leupold back country rings, and a xp action.[br][br]Trued the action and bolt, bedded, muzzle brake work, fit and chambered the barrel, and so on......[br][br]Finished barrel length is 14.5"[br][br]Just a shade over 6Lbs as pictured.[br][br]and now its ready to hunt...[br][br][br][br][br][br]First 5 rounds. 130 Barnes at just over 3000 FPS. Top one was after bore sighting...then the second round a little high....last three were after the final correction at 100 yards.[br][br][br]

  2. #2
    Basic Member
    Join Date
    Jan 2019
    Posts
    96
    She’s a beauty Chris! I love the barrel fluting

  3. #3
    Basic Member
    Join Date
    Nov 2014
    Location
    Iowa
    Age
    75
    Posts
    357
    Nice to see a post from you Chris. You knocked out another nice one.

  4. #4
    New Member
    Join Date
    Dec 2022
    Location
    NW LA
    Posts
    9
    Good job! A gun that's both fine shooting and extremely accurate!
    Good luck and good hunting.

  5. #5
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    447
    Looks sharp. Is that an XP action?

  6. #6
    Basic Member
    Join Date
    Nov 2022
    Posts
    56
    Yes

  7. #7
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799
    What case are you using to transport ? Been looking for a smaller case for my Savage PCS. Yours is a little longer than mine. Don’t like using my AR case so on the hunt. Thanks
    Savage 10 FCP-SR 308, 300BO PCS

  8. #8
    Basic Member
    Join Date
    Nov 2022
    Posts
    56
    I just put it in my pack when I hunt….the floor board of the truck works for the drive out to public land to shoot

  9. #9
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799
    Quote Originally Posted by HandgunhuntingAfield View Post
    I just put it in my pack when I hunt….the floor board of the truck works for the drive out to public land to shoot
    ok. Thanks.
    Savage 10 FCP-SR 308, 300BO PCS

  10. #10
    Basic Member thebeav's Avatar
    Join Date
    May 2022
    Location
    Unfortunately Western New York
    Posts
    196
    Very nice !
    Good luck with it .....

  11. #11
    Basic Member
    Join Date
    Jan 2023
    Location
    Missouri Ozarks
    Posts
    30
    Very nice looking build. I am a fan of the 308 myself. The barrel work looks very nice. It looks like it will be a shooter as well as nice to look at.
    I wish that my Hunting Nosler M48 was chambered in 308, instead of 6.5CM.
    Nice to see you making nice toys again.

    Bob R
    See You at the Range

Similar Threads

  1. Witt machine
    By CBIshooter in forum Other Firearm and Shooting Accessories
    Replies: 3
    Last Post: 05-05-2019, 05:48 AM
  2. new savage 12 6mm norma br( bad machine work)
    By alpha223 in forum Picture Post
    Replies: 6
    Last Post: 03-20-2016, 10:28 PM
  3. DIY case annealing machine - FUN!
    By jhelmuth in forum Ammunition & Reloading
    Replies: 42
    Last Post: 03-24-2013, 07:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •