Firstly, is it at least a Post ‘66 rifle? If it’s a Pre-‘66, forget it. If it’s post, the Action will fit & function. Yes, the staggered Magazine box would need to be removed. It comes off easy. Small screwdriver on the edge & pry the lip off. No biggie. However, a bit of machining needs to be done on the bottom of Action Magazine well. The Maxine used in the Oryx is an AICS. Several manufacturers make these. They are either Long or Short Action. If you are not a DIY person who has done other kinds of fabrication, modification, etc… then I do not recommend it. Unless you are ok with it being a single shot.
Bookmarks