Fall 2023 Impulse Rigs

[shoots100]

Since Savage first introduced the Impulse Predator rifle I was hooked before I even handled one.
After buying one in early 2021 and using it to hunt coyote in all sorts of weather and abuse without failure, I was hooked and needed to enhance it to fit my needs.
I added a .243 carbon fiber barrel last year and went looking for a more easily adjustable stock.
Since I needed a straight pull backup rifle to match my primary rifle, I added another Predator to the stable and chambered it in 20-250.
I just received a Boyd's At-one thumbhole stock and when I get it back from my friend who's going to widen the barrel channel, that should complete the primary rifles enhancements.
I'm going to stick with the CF .243 barrel in the primary and 20-250 in the backup for now, but I have .308 and .260 barrel assy's available if the need for heavier firepower arises.

SJC

[subzerocg]

I’ve never used a straight pull bolt.
How does it compare to the traditional bolt style?
If you prefer the straight pull, what are the reasons you prefer it over the traditional one?
Thanks

[shoots100]

Why the straight pull Impulse ?
Simplicity and adaptability.
Two features a savage barrel nut aficionado can fully appreciate.

SJC

[RCE1]

Why the straight pull Impulse ?
Simplicity and adaptability.
Two features a savage barrel nut aficionado can fully appreciate.

SJC

Not to mention they are ambidextrous.

[shoots100]

I ended up chopping six inches off of the 20-250 barrel to make it twenty inches long, threaded it and a bead blast to make it non reflective.
It's still heavy, but a lot more maneuverable.
Drops coyote like a rock.

[TENN]

Handled this model in 243 yesterday at Bud’s in Sevierville, TN. Full retail of four figures on the price tag whereas the website list this rifle for about $750 and free shipping with AI mags. Someone here said the AI mags were far better than anything Savage makes in house.

With the full length and unfluted barrel the balance was actually quite nice for me, although slight muzzle heavy. It was so slight I could see a scope bringing the balance back to the barrel nut area. Flutes or CF would make this rifle handle very well for me.

I also looked at the Kiui(I think that’s right) model in 300 WM, 30.06 and 6.5. Longer heavy barrel but with flutes. I really liked this model, but balance was slightly heavier at muzzle than Predator. This one also takes a savage magazine. One 300 had a bolt that would stick at the rear like it wanted to release from the action, even though the bolt release had not been touched. Counter guy had to do a trick with two hands I couldn’t make out to release the bolt, and then he could repeat the issues all over. He said there was a problem with trigger group and that it had to be worked on. I couldn’t duplicate this issue with the other ten or so Impulses n the rack.

Being ambidextrous is a huge selling point for me. id love to have one of these, but I’m still leaning towards the Axis in 6.5 so I have a knock around rifle. We shall see.

Barrels can move from Axis to 110 to Impulse as long as barrel nut/lug dimensions are all the same, correct?

[dcf69]

Since Savage first introduced the Impulse Predator rifle I was hooked before I even handled one.
After buying one in early 2021 and using it to hunt coyote in all sorts of weather and abuse without failure, I was hooked and needed to enhance it to fit my needs.
I added a .243 carbon fiber barrel last year and went looking for a more easily adjustable stock.
Since I needed a straight pull backup rifle to match my primary rifle, I added another Predator to the stable and chambered it in 20-250.
I just received a Boyd's At-one thumbhole stock and when I get it back from my friend who's going to widen the barrel channel, that should complete the primary rifles enhancements.
I'm going to stick with the CF .243 barrel in the primary and 20-250 in the backup for now, but I have .308 and .260 barrel assy's available if the need for heavier firepower arises.

SJC

Nice setup- are you machining those barrel extensions or did you find a source?

[shoots100]

Nice setup- are you machining those barrel extensions or did you find a source?

A machinist friend made the QC kit parts for me and himself.
He just bought another predator rifle in .308 and a carbon fiber 22-250 barrel for it.
Now he has three calibers to choose from.
Going to get it set up tomorrow and hit the woods after sighting it in.

SJC