Reply With QuoteSSS has them and, last time I looked, they still had pictures of them on their sponcers page too.
where to get aftermarket bolt handles? I do not see any on any of the sponsor sites.
SSS has them and, last time I looked, they still had pictures of them on their sponcers page too.
Ahhhhh I never scrolled far enough down to see them. Still would not mind looking at others if anybody knows a source.
Kevin at Stockade Gunstocks makes one.
okay, here's a more specific one - what are the parts compatibility between the 10 and 110? for instance, can model 10 bolt handles fit the 110, since they have nothing at all to do with the chamber and length of action? there seem to be more handles for the 10 than the 110...
any other parts common between the two?
I think it is easier to list the parts that are not compatible, off the top of my head the only ones I can think of are:
Stock
Bolt body
Firing pin & spring
The magazine box & follower may be, for instance I have a 110 that started life as a .308 so it has the short magazine box cut out in the receiver. As far as I know everything else will fit either one. There are many folks here that are much more knowledgeable than I so I'm sure they will add to the list if I missed anything.
Bob
It's better to shoot for the moon and hit the fencepost than to shoot for the fencepost and hit the ground!
Bob pretty much summed it up, with the exception of 1 pc scope bases.
"As long as there's lead in the air....there's still hope.."
I knew I would miss something!
It's better to shoot for the moon and hit the fencepost than to shoot for the fencepost and hit the ground!
The one I have.
http://www.rimfiretechnologies.com/P...ductCode=16006
[img width=460 height=450]http://www.rimfiretechnologies.com/v/vspfiles/photos/16006-2.jpg[/img]
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks