Cannot find Twist Rate anywhere for Savage Axis heavy barrel 22-250 with Boyd's adjustable stock from Walmart Special

[TB65s]

Hello Everyone,

We bought a Savage Axis 22-250 with Boyd's adjustable stock from local Walmart and gun looks great but on heavy side so started trying to find twist rate to help decide on good bullet to start reloading for and can not find anywhere on gun, owners manual, receipts, on box and when asked around have been told alot of diffetent twists. I emailed Savage few days ago and so did friend helping and no reply.
Had friend use cleaning rod and he came up with 1:8 or 1:9 twist and found some Nosler Accurate 80gr bullets and either one of those twists should work.
So today reloaded Nosler Accurate 80gr bullets and shot and bullet keyholing thru paper.
How can get the right twist for this rifle?
Thanks for any help.

[Mr.Snerdly]

I think all Savage 22-250s are 1 in 12. I could be wrong but that is the most likely twist. I think a 60 or 62 grain is about as heavy as you want to go.

[Robinhood]

I think all Savage 22-250s are 1 in 12. I could be wrong but that is the most likely twist. I think a 60 or 62 grain is about as heavy as you want to go.

i agree.

[Dave Hoback]

+3.. Always what I’ve read & knew them to have.

[charlie b]

First, I am glad to welcome you to the nut house.
Second, I am also happy to hear the some Walmarts are selling special Savage rifles. FYI, some of the big box stores order special option guns. Walmart Axis models were fitted with heavy barrels and special stocks (neither of which were available from Savage). Cabela's used to sell a special version of the model 12 varmint rifle that was also a super bargain.

Rifling twist from Savage is usually the norm for that cartridge. The .22-250 is usually used as a very high vel varmint rifle so a slower twist rate is used for lighter bullets at those velocities.

But, it might have a 1:9 twist since that is what Savage uses on the .223. If so it was made to shoot the 69gn match bullets.

My Axis in .223 (1:9) did very well with 77gn Sierra Matchking and 75gn Hornady ELD match bullets at near max loads (work up carefully). And, yes, the extra length of the 80gn means it is not stable. FWIW, Sierra recommends a 1:8 twist for the 77gn and a 1:7 twist for the 80gn SMK's.

[Dave Hoback]

Hmm.. I don’t believe 1:9 was ever offered in 22-250 Charlie. It was the standard for 223, that is correct. But never in 22-250, that I’ve ever even heard. Remember that barrel twist & velocity share a bond. Less twist is required for the same length bullet at 3800fps than is required 2800fps. And 22-250 being a laser beam, that was Savage’s rationale on the matter.