I'm having a difficult time obtaining consistent primer seating depth with my Lee Classic Cast press. Sometimes they appear to be seated slightly below the base of the case and other times they are slightly proud. Needless to say, this is affecting my finished CBTO measurements. I'd say the measurement varies from .001-.003. It doesn't seem to matter if I tumble the brass or just wipe it off and clean the pocket with a case conditioning tool. I'm using the Lee case conditioner to clean the pocket. The raised ring around the flash hole in the picture is consistent. Am I supposed to remove this lip around the flash hole before seating the primers? It definitely keeps the primer pocket cleaner from reaching the bottom of the primer pocket. I've been using a pick to remove the residue that's left after cleaning the pocket.
Reply With Quote
Bookmarks