Boyds Agility Fitment

[Loopi]

Anyone have experience with a Boyds Agility stock. I can't seem to get ahold of them each time I call. My issue is that I would like to convert my Model 116 top bolt release, staggered feed, blind mag, 300 Win Mag to a detachable box mag. Is it as simple as just ordering the Agilty stock in the detachable magazine configuration or would there be more to purchase? I have no problems purchasing additional components I am just trying to determine if converting is even possible.

Thank you,

George

[KMW1954]

I believe the action screw spacings are different between the two magazine types. At lest it is with the model 10 and 11.

[Dave Hoback]

The screw spacing is the same for ALL Long Actions. Screw spacing is not different between Model 10 & 11 for sake of their model numbers. Yes it’s possible. But there will likely be some fitting. However, this is not unheard of with stocks. Your other option is going with a Chassis, which most all use AICS mags.

[KMW1954]

The screw spacing is the same for ALL Long Actions. Screw spacing is not different between Model 10 & 11 for sake of their model numbers..

Dave, thank you for correcting me. My experience as you know is all with the short actions. Model 10 Blind Action Stagger Feed and Model 11 Center Feed DBM.