Originally Posted by
jpdown
The magazine wells in aftermarket staggerfeed stocks are usually oversized. I threw the L-clip away, since it is a PITA and can't be a positive addition for accuracy. Tape the magazine box to the action in the correct position using a business card between the magazine lips and bolt. Put a small ball (4) of epoxy putty in each corner of the magazine well. Attach the action with magazine box to the stock and press the corners of the magazine box (coat with release agent) into the epoxy putty. It will harden quickly. This forms a base in the stock well for your magazine box to sit on. It will now feed correctly and will not touch/bind your bolt. Clean up excess putty inside the corners of the magazine box with a dremel tool. Once you know the magazine feeds correctly, you can glue or Velcro in place. Or, it may stay in place with just a friction fit.
Bookmarks