I am hoping someone can tell me what the difference is between the sears of the 110 series, the 111 series pre & post accutrigger?
Thank you - oldwrench
I am hoping someone can tell me what the difference is between the sears of the 110 series, the 111 series pre & post accutrigger?
Thank you - oldwrench
The Sears? None really. Same basic sear used. Doubles as the bolt release & made of stamped steel.
+1 with Dave. Pre and post Accu-trigger I am unaware of any difference. I have swapped 3-screw and Accu-triggers on actions designed for either with no change to sear needed. Trigger brackets on the other hand are different, but that's another topic
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Only notable difference I'm aware of would be for the bottom bolt release sears as they won't have the top bolt release "flag".
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
To add I think some of the older ones were manufactured as 2 pieces that were pressed together with a pin. I only mention this because I had two of those particular ones that broke and I wound up clamping them back in place spot welding them at the pin then filing down the spot and rebluing them. Differences in the model numbers is none.
A good wife and a steady job has ruined many a great hunter.
Bookmarks